Rubber and Plastics Combustible Dust
Plastics can create a lot of static electricity as they are being recovered. Tiger-Vac has a complete line of static dissipative vacuum cleaners which can be used to recover plastics, complete with tool kits, to ensure safe recovery for the user.
To view all of Tiger-Vac's line of electric single phase explosion proof vacuum cleaners click here.
Información rápida
0081 
II 2 G/D Ex d IIA T3 Ex tD A21
IP6X – T 200°C
LCIE 03 ATEX 6297
0081 II 2 G/D Ex d IIA T4 Ex tD A21
IP65 – T 120°C
LCIE 03 ATEX 6297
GUARANTEED to be capable of safely recovering combustible/conductive dusts &/or flammable liquids.
IECEx Certified
- Legally certified explosion proof/dust ignition proof by a recognized testing laboratory
- Less than 10 Ohms of resistivity
- Fltro HEPA - Incluido con una eficacia de 99.995% sobre 0.3 micras comprobado. IEST RP-CC001.3.H14 por MPPS segun el metodo EN 1822
- *Cleanroom compatible. Can be used in the pharmaceutical industry with optional stainless steel cart
- Designed for applications where finely pulverized dust is to be recovered
- Single phase explosion proof/dust ignition proof motor
- Available with Manual Reverse Purge ((MRP)) system
- For dry recovery only
- All stainless steel SAE 304 construction (except cart). Stainless steel cart available
- Detachable recovery tank (DT). Recovery capacity of 8.75 gallons (35 liters)
- Equipped with an SD* polyliner and clip for easy and safe disposal of recovered materials
- Equipped with an SD* 4-wheel cart and tool basket
- Complete static dissipating tool kit and suction hose included
SD* Static Dissipative
Detalles
All stainless steel SAE 304 construction (except cart). Less than 10 Ohms of resistivity. This unit is equipped with a true HEPA (H14) Filter located downstream of the motor. This unit is cleanroom compatible and can be used in the pharmaceutical industry when equipped with an optional stainless steel cart. This unit has been designed for applications where finely pulverized dust is to be recovered. This dry only unit contains a Manual Reverse Purge ((MRP)) system. All of our HEPA vacuum cleaners are Aerosol Leak Tested before leaving our facility
Manual Reverse Purge System
The Manual Reverse Purge (MRP) System allows the operator to not have to open the vacuum cleaner in order to clean the Cartridge. By opening the Reverse Purge Atmospheric Pressure Release Valve the Cartridge is automatically purged of dusts. This Purging System reduces maintenance down time.
The Manual Reverse Purge (MRP) works by :
1 - Closing the slider on the opening to block the suction intake orifice for approximately 5 seconds while the vacuum is running.
2 - Then quickly open Purge Valve. Air is now flowing via the valve through to the filter.
Keep Purge Valve open for 1-2 seconds then close (repeat above steps 2 or 3 times).
Reverse Purge System will cause dust to fall off of the filter.
Folletos y Certificados
| Name | Description | Download |
| EXP1-35L (DT) RE HEPA (MRP) Brochure (Metric) | Technical data for EXP1-35L (DT) RE HEPA (MRP) in metric units (Millimeters, Kilograms...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| EXP1-35L (DT) RE HEPA (MRP) Brochure (Imperial) | Technical data for EXP1-35L (DT) RE HEPA (MRP) in imperial units (Inches, Pounds...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| ATEX Vacuum Cleaners electrically operated singlephase T3 | Certification Document | descargar |
| Certificate of Compliance | CSA Certificate of Compliance | descargar |
