Tiger-Vac

Tel: (39) 051 79.53.52

CD/EUR-36L EX DT (MFS) ULPA

Farmaceutica Recuperacion Seca Farmaceutica Recuperacion Seca


CD/EUR-36L EX  DT (MFS) ULPA
Main Cloth Filter

Certificaciones


GUARANTEED for the safe recovery of combustible/conductive dusts


CD EX series IECEx 3rd party certified
Ex d IIB T4 Gb Ex t IIIC T135oC Db IP65
IECEx LCI 10.0040
Vacuum Cleaner certified for providing an Equipment Protection Level of EPL Db and EPL Gb

ATEX 3rd party certified

ce-mark 0081 ex_mark II 2 GD Ex d IIB T4 Gb
Ex t IIIC T135oC Db IP65
LCIE 03 ATEX 6295
See Certificate


Descargas

Descripción Link
CD/EUR-36L EX DT (MFS) ULPA Brochure US Letter Imperial
A4 Imperial
EX-MAT Recovery Certificate Download
EX-MAT Recovery Certificate Download
ATEX Certificate Download
ATEX Certificate Download
  • Certificado legalmente a prueba de explosión y de ignición de polvo por un laboratorio acreditado según las leyes vigentes
  • Resistencia de menos de 10 Ohms
  • Motor monofásico de funcionamiento continuo (TEFC) a prueba de explosión/ignición de polvo
  • Incluye Filtro ULPA: Con una eficacia de 99.999% sobre 0.12 micras. Probado según IEST RP-CC001.3. Eficacia de 99.995% sobre 0.18 micras. Probado según IEST RP-CC001.3. Clasificado U15 según el método MPPS de la norma EN 1822. Todos nuestros Aspiradores ULPA están Probados Contra Fugas con Aerosol antes de abandonar nuestras instalaciones
  • Conforme a las exigencias para salas blancas ISO Clase 4 (antes Clase 10). Adaptado para su uso en la industria farmacéutica con un carro de acero inoxidable opcional SAE 304
  • Sacudidor de Filtro Manual (MFS)
  • Filtro Principal Antiestático Lavable en el interior de un Compartimento para Filtros extraíble
  • Todo fabricado de acero inoxidable SAE 304 (excepto el carro)
  • Tanque de recuperación desmontable (DT) para una fácil eliminación del material recuperado
  • Bolsa de Disipación Estática de Polietileno y clip opcionales para una eliminación fácil y segura del material recuperado
  • Ensamblaje vertical apto para zonas con limitaciones de espacio. El aspirador causa una reducida huella medioambiental
  • Equipado con un Carro con Motor Suspendido en su parte superior (CSMT) y una cesta para accesorios. Incluye ruedas antiestáticas
  • Accesorios opcionales de Ø38mm (Ø1.5") o Ø50mm (Ø2") a su disposición
  • Motor de Grupo E (Polvo de Metal) e Interruptor disponibles sobre pedido
  • Motores de diferente rendimiento también disponibles

# de partenombreLimpieza del filtroPesoDimensionesRecuperación secapresión del vacíoAir Flow at Suction IntakeFase
112150B1CD/EUR-36L EX DT (MFS) ULPA Z1-2-21-22MFS218 lbH70″×W22″×L31″9.5 Gal100.39" H2O125 CFMThree
112150B3CD/EUR-36L EX DT (MFS) ULPA Z1-2-21-22MFS218 lbH70″×W22″×L31″9.5 Gal100" H2O125 CFMSingle
# de partenombreCaballos de fuerzaAmperajePotencia en vatiosHercioVoltaje(Tension)Electrical Plug
112150B1CD/EUR-36L EX DT (MFS) ULPA Z1-2-21-223 HP4.8 A2200 W50 Hz400 VNot Inc.
112150B3CD/EUR-36L EX DT (MFS) ULPA Z1-2-21-222 HP12.3 A1500 W50 Hz230 VNot Inc.

ULPA

A ULPA filter is a type of air filter. It can remove at least 99.999% of dust, pollen, mould, bacteria and any other airborn particles with a size of 0.12 microns or larger.

North-America: Each ULPA Filter has a minimum filtration efficiency of 99.999% on 0.12 micron.  Tested as per IEST-RP-CC001.3.

Europe: Each ULPA Filter has a minimum filtration efficiency of 99.9995% on 0.18 micron, rated U15 as per EN 1822 by MPPS method.

MFS

MFS_top (illustration shows a top-mounted shaker)

The Manual Fitler Shaker system allows the operator to clean the main filter without having to open the vacuum cleaner.  This shaker System reduces maintenance down time.

The Manual Filter Shaker System consists of a spring action mechanism operating directly onto the filter cage located inside of the filter chamber. The system is operated by pressing on the ergonomic handle located on the side or top of the filter chamber.

The Manual Filter Shaker dislodges the accumulated caked-on dust from the filter thus improving the filter’s performance.

The filter, along with the filter cage, can be easily removed from the filter chamber and washed with lukewarm water and mild detergents.

Ex-Mat Recovery

ex-mat-logoTiger-Vac, como fabricante GARANTIZA que sus aspiradores pueden ser Útilizados para  récuperar con toda seguridad polvos combustibles/conductivos y/o liquidos inflamables.

La marcacion ATEX certificada por medio de su indice de proteccion(IP),la capacidad del aspirador de estar en  presencia donde hay polvos combustibles/conductivos y/o liquidos inflamables. pero no certifica la capacidad del aspirador para récuperar dichos materiales.

DT

detachable-tankMany of our vacuum cleaners come equipped with a detachable tank for the easy disposal of recovered materials. Our detachable tanks range in size from 20 to 160 liters (5.28 gal to 42.25 gal) and are available in stainless steel or powder coated, with or without wheels for maneuverability.


Views with Filter Chamber and Recovery Tank removed

CD-EUR-36L-MFS-3-units-Picture


Partes y Herramientas(Accesorios)

ULPA FILTER - Included
Part#QtyDescription
2110271ULPA FILTER (U15)
FILTERS AND ACCESSORIES - Included
Part#QtyDescription
214689A1MAIN FILTER ONLY WITH CLAMP SD* w/LACES (FILTER SUPPORT RING & CAGE SOLD SEPARATELY)
2146911FILTER SUPPORT RING FOR 11-DT -STAINLESS STEEL
2146861CAGE FOR FILTER -STAINLESS STEEL
PRE-FILTERS - Opcional
Part#QtyDescription
214694T1PRE-FILTER ONLY SD* PTFE LAMINATED
MUFFLER - Opcional
Part#QtyDescription
2147351MUFFLER ASSEMBLY FOR RE EXHAUST SYSTEM, STAINLESS STEEL WITH SOUND INSULATING FOAM
POLY LINER RECOVERY BAGS AND ACCESSORIES - Opcional
Part#QtyDescription
212100DS1CONDUCTIVE POLY LINER WITH DRAW STRING (20/25 LITRES)
2137801POLY LINER RETAINER PLATE ASSEMBLY (FOR USE WITH MOTORS UP TO 5HP)
GROUND CONTINUITY TESTER - Included
Part#QtyDescription
211065B1MULTIMETER
Ø1.5" (38mm) STATIC CONDUCTIVE TOOLS AND ACCESSORIES (RESISTIVITY OF 10/3 - 10/5) - Opcional
Part#QtyDescription
383440B1STATIC CONDUCTIVE CRUSHPROOF SUCTION HOSE ASSEMBLY(NO WIRE)Ø1.5"(38mm)x10'(3m) FOR 2" CAMLOCK INTAKE
3813641WAND ASSEMBLY (2PC) STAINLESS STEEL WITH ALUMINUM ATTACHMENT
3812361UNIVERSAL TOOL SD* W/CONDUCTIVE BRUSH STRIPS,RUBBER BLADES,BRASS AXLE&WHEELS Ø1.5"(38mm)x18"(45.7cm)
3811881CREVICE TOOL SD* 11"(27.9cm), ALUMINUM
381185A1DUSTING BRUSH SD* WITH STAINLESS STEEL COUPLING & CONDUCTIVE BRISTLES 5"(12.5cm) -ALUMINUM
Ø1.5" (38mm) EXPLOSION PROOF TOOLS AND ACCESSORIES - MANDATORY FOR USE WHEN RECOVERING CONDUCTIVE, METAL AND PYROTECHNIC DUST. STATIC DISSIPATIVE (LESS THAN 10 OHMS OF RESISTIVITY) - Opcional
Part#QtyDescription
381400B1KANAFLEX SUCTION HOSE ASSEMBLY SD* Ø1.5"(38mm)x10'(3m)W/HOSE CUFF&RING, FOR USE WITH 2"(50mm)CAMLOCK
381364A1WAND ASSEMBLY (2PCS), STAINLESS STEEL w/ALUMINUM ATTACHMENT, w/TAPER FOR USE w/HOSE CUFF w/RING
3812361UNIVERSAL TOOL SD* W/CONDUCTIVE BRUSH STRIPS,RUBBER BLADES,BRASS AXLE&WHEELS Ø1.5"(38mm)x18"(45.7cm)
381372D1CREVICE TOOL, Ø1.5"(38mm)x11"(27.9cm) -STAINLESS STEEL (FOR USE WITH HOSE CUFF & RING)
381185DA1DUSTING BRUSH -ALUMINUM SD* 5"(12.5cm) WITH CONDUCTIVE BRISTLES FOR USE WITH HOSE CUFF & RING
Ø2" (50mm) STATIC CONDUCTIVE TOOLS AND ACCESSORIES (RESISTIVITY OF 10/3 - 10/5) - Opcional
Part#QtyDescription
5005391CRUSHPROOF SUCTION HOSE ASSEMBLY Ø2"(50mm)x10'(3m) STATIC CONDUCTIVE WITH Ø2"FEMALE CAMLOCK ALUMINUM
5001601WAND ONLY SINGLE BEND Ø2"(50mm)x48"(1.2m) WITH TAPER FOR UNIVERSAL TOOL -ALUMINUM
500161A1UNIVERSAL TOOL Ø2"(50mm)x20"(51cm)SD* NO COUPLING WITH BRASS WHEELS&CONDUCTIVE BRISTLES&RUBBER BLADE
500156B1CREVICE TOOL SD* (NO COUPLING) Ø2"(50mm)x15"(38cm) -ALUMINUM
501184A1DUSTING BRUSH ALUMINUM SD* Ø2"(50mm)x5"(12.7cm)WITH CONDUCTIVE BRISTLES & TUBE FOR PRESSURE FIT
5002301CONICAL NOZZLE RUBBER SD* ASSEMBLY Ø2"(50mm)x7.5"(19cm) WITH Ø2"(50mm)PRESSURE FIT ALUM. CONNECTOR
5002341TIGER-CLAW RUBBER SD* ASSEMBLY Ø2"(50mm)x4.5"(11.5cm)WITH Ø2"(50mm)PRESSURE FIT ALUMINUM CONNECTOR
501200A1UTILITY TOOL SD* Ø2"(50mm)x8"(20.3cm) WITH CONDUCTIVE BRISTLES & TUBE FOR PRESSURE FIT -ALUMINUM
Ø2" (50mm) EXPLOSION PROOF TOOLS AND ACCESSORIES - MANDATORY FOR USE WHEN RECOVERING CONDUCTIVE, METAL AND PYROTECHNIC DUST. STATIC DISSIPATIVE (LESS THAN 10 OHMS OF RESISTIVITY) - Opcional
Part#QtyDescription
500305A1KANAFLEX SUCTION HOSE ASSEMBLY SD* Ø2"(50mm)x10'(3m) WITH Ø2" FEMALE CAMLOCK ALUMINUM,HOSE CUFF&RING
500160SS1WAND ONLY SINGLE BEND Ø2"(50mm)x48"(1.2m) -STAINLESS STEEL AISI 304 FOR HOSE CUFF & RING
500161A1UNIVERSAL TOOL Ø2"(50mm)x20"(51cm)SD* NO COUPLING WITH BRASS WHEELS&CONDUCTIVE BRISTLES&RUBBER BLADE
5005581CREVICE TOOL Ø2"(50mm)x15"(38cm) -STAINLESS STEEL AISI 304
501184DA1DUSTING BRUSH ALUMINUM SD* Ø2"(50mm)x5"(12.7cm) WITH CONDUCTIVE BRISTLES FOR USE WITH HOSE CUFF&RING
500230D1CONICAL NOZZLE ASSEMBLY -CONDUCTIVE RUBBER Ø2"(50mm)x7.5"(19cm)FOR USE WITH HOSE CUFF & RING
500234D1TIGER-CLAW RUBBER SD* ASSEMBLY Ø2"(50mm)x4.5"(11.5cm) FOR USE WITH HOSE CUFF & RING
500154DA1UTILITY TOOL SD* Ø2"(50mm)x8"(20.3cm) WITH CONDUCTIVE BRISTLES FOR USE WITH HOSE CUFF & RING

You are here