Tiger-Vac

Tel: (39) 051 79.53.52

SS-10 (4W) BASE MODEL

Pharma* - Dry Recovery


Certificaciones


GUARANTEED for the safe recovery of combustible/conductive dusts & flammable liquids.

ATEX 3rd party certified

ce-mark ex_mark II 2 GD c IIC T6 (85oC)
LCIE 03 ATEX 6310

See Certificate


Descargas

Descripción Link
SS-10 (4W) BASE MODEL Brochure US Letter Metric
A4 Metric
ATEX Certificate Download
ATEX Certificate Download
Technical SheetMetric
  • Certificado legalmente a prueba de explosión y de ignición de polvo por un laboratorio acreditado según las leyes vigentes
  • Resistencia de menos de 10 Ohms
  • Filtro HEPA Opcional: Con una eficacia de 99.995% sobre 0.3 micras. Probado según IEST RP-CC001.3. Clasificado H14 según el método MPPS de la norma EN 1822 y conforme a OSHA. Todos nuestros Aspiradores HEPA están Probados Contra Fugas con Aerosol antes de abandonar nuestras instalaciones
  • Conforme a las exigencias para salas blancas ISO Clase 4 (antes Clase 10). Puede utilizarse en la industria farmacéutica
  • Para limpieza general en ubicaciones peligrosas
  • Neumático (aire comprimido)
  • Para la recuperación de materias secas solamente
  • Sistema de Flotador opcional a su disposición para la recogida de líquidos
  • Todo fabricado de acero inoxidable SAE 304 (excepto el carro)
  • Carro de acero inoxidable disponible
  • Bolsa de Disipación Estática de Polietileno y clip opcionales para una eliminación fácil y segura del material recuperado
  • Fijado a un carro antiestático de 4 ruedas de acero inoxidable para un manejo fácil. El carro tiene ruedas conductivas y antiestáticas de acero inoxidable
  • Juego de Accesorios antiestáticos completo a su disposición

# de partenombreLimpieza del filtroSound LevelPesoDimensionesRecuperación húmedaRecuperación secapresión del vacío
110262SS-10 (4W) BASE MODELNONE70 dB(A)22 kgH81cm×W48cm×L61cm28.4L22.7L4572 mm H2O
# de partenombreAir Flow at Suction IntakeVenturiMinimum Compressor HP - 1 HP = 4 CFM1Tamaño de la manguera de alimentacionVolumen de la entrada de airePresion de la entrada de aireAirjet (Venturi)
110262SS-10 (4W) BASE MODEL187 m3/hSingle Venturi15 HP1/2"76.5 m3/h80 PSI / 5.5 Bar6mm
Notes:
1 Performance may vary depending on compressor and installation.

HEPA

A HEPA filter is a type of air filter, which means it filters the air coming in or out of the vacuum cleaner system. It can remove at least 99.99% of dust, pollen, mould, bacteria and any other airborn particles with a size of 0.3 micron or larger.

North-America: Each HEPA Filter has a minimum filtration efficiency of 99.99% on 0.3 micron.  Tested as per IEST-RP-CC001.3 and OSHA compliant.

Europe: Each HEPA Filter has a minimum filtration efficiency of 99.995% on 0.3 micron, rated H14 as per EN 1822 by MPPS method.

Click here to download Tiger-Vac's HEPA Filter's standards chart.

10 Ohms

In order for Tiger-Vac to legally certify an Explosion Proof/Dust Ignition Proof vacuum cleaner system the unit must be static dissipative (SD*) and conductive and have a resistivity measuring less than 10 Ohms to any point on the vacuum cleaner system. This makes the unit eligible to be Explosion Proof/Dust Ignition Proof and be part of Tiger-Vac's quality control management system ISO 9001:2008.
When using a pneumatic Explosion Proof Vacuum Cleaner System the customer must make sure that the source of air supply (compressor) is grounded.

ULPA

A ULPA filter is a type of air filter. It can remove at least 99.999% of dust, pollen, mould, bacteria and any other airborn particles with a size of 0.12 microns or larger.

North-America: Each ULPA Filter has a minimum filtration efficiency of 99.999% on 0.12 micron.  Tested as per IEST-RP-CC001.3.

Europe: Each ULPA Filter has a minimum filtration efficiency of 99.9995% on 0.18 micron, rated U15 as per EN 1822 by MPPS method.


Partes y Herramientas(Accesorios)

HEPA FILTER - Opcional
Part#QtyDescription
211027B1HEPA FILTER 99.995% EFFICIENCY ON 0.3 MICRON (CE VERSION)
FILTERS AND ACCESSORIES - Included
Part#QtyDescription
211013A1MAIN FILTER ASSEMBLY SD* FOR 10/15/25 GAL EXP PROOF VACS WITH LACES (CAGE SOLD SEPARATELY)
212734A1STAINLESS STEEL CAGE FOR CLOTH FILTER -ELECTROPOLISHED
PRE-FILTERS - Opcional
Part#QtyDescription
2120081PRE-FILTER ASSEMBLY SD* (10,15&25 GALLON)
EXHAUST FILTRATION - Opcional
Part#QtyDescription
2130341ADAPTOR PLATE, WITH Ø2"(50mm) CAMLOCK VENTING EXHAUST FOR USE WITH RE SYSTEM -STAINLESS STEEL
POLY LINER RECOVERY BAGS AND ACCESSORIES - Opcional
Part#QtyDescription
212100A1CONDUCTIVE POLY LINER FOR MODELS EXP1/SS-10, WITH HOLE FOR SUCTION INLET
2137801POLY LINER RETAINER PLATE ASSEMBLY (FOR USE WITH MOTORS UP TO 5HP)
LIQUID RECOVERY CONVERSION KIT - Opcional
Part#QtyDescription
2148521FLOATER AND CAGE ASSEMBLY FOR USE WITH SINGLE PHASE ELECTRIC EXPLOSION PROOF VACUUM
21485410.75"(19mm) DRAIN VALVE ASSEMBLY FOR 4W SYSTEM
2110101LIQUID FILTER ASSEMBLY SD* FOR 10/15/25 GAL EXP PROOF VACS
GROUND CONTINUITY TESTER - Included
Part#QtyDescription
211065B1MULTIMETER
AIR SUPPLY HOSE ASSEMBLY AND ACCESSORIES - Opcional
Part#QtyDescription
2110301AIR SUPPLY HOSE ASSEMBLY SD* Ø0.5"(12.7mm)x50'(15m) WITH 1 MALE QUICK DISC. & 1 FEMALE QUICK DISC.
211033B1FEMALE QUICK DISCONNECT Ø0.5"(12.7mm) WITH Ø0.5"(12.7mm) FEMALE THREAD (BRASS)
211095C1HEX NIPPLE -BRASS (0.5"NPT)
STATIC CONDUCTIVE TOOLS AND ACCESSORIES (RESISTIVITY OF 10/3 - 10/5) - Opcional
Part#QtyDescription
3834401STATIC CONDUCTIVE CRUSHPROOF SUCTION HOSE ASSEMBLY(NO WIRE)Ø1.5"(38mm)x10'(3m) FOR 1.5" CAMLOCK IN
3813641WAND ASSEMBLY (2PC) STAINLESS STEEL WITH ALUMINUM ATTACHMENT
3812361UNIVERSAL TOOL SD* W/CONDUCTIVE BRUSH STRIPS,RUBBER BLADES,BRASS AXLE&WHEELS Ø1.5"(38mm)x18"(45.7cm)
3811881CREVICE TOOL SD* 11"(27.9cm), ALUMINUM
381185A1DUSTING BRUSH SD* WITH STAINLESS STEEL COUPLING & CONDUCTIVE BRISTLES 5"(12.5cm) -ALUMINUM
3834621CONICAL NOZZLE ASSEMBLY W/CURVED TIP, 10"(25cm) CONDUCTIVE RUBBER, FOR NON WIRE HOSE (323562+381155)
EXPLOSION PROOF TOOLS AND ACCESSORIES - MANDATORY FOR USE WHEN RECOVERING CONDUCTIVE, METAL AND PYROTECHNIC DUST. STATIC DISSIPATIVE (LESS THAN 10 OHMS OF RESISTIVITY) - Opcional
Part#QtyDescription
381400A1KANAFLEX SUCTION HOSE ASSEMBLY SD* Ø1.5"(38mm)x10'(3m)W/1.5"FEMALE CAMLOCK ALUMINUM,HOSE CUFF&RING
381364A1WAND ASSEMBLY (2PCS), STAINLESS STEEL w/ALUMINUM ATTACHMENT, w/TAPER FOR USE w/HOSE CUFF w/RING
3812361UNIVERSAL TOOL SD* W/CONDUCTIVE BRUSH STRIPS,RUBBER BLADES,BRASS AXLE&WHEELS Ø1.5"(38mm)x18"(45.7cm)
381372D1CREVICE TOOL, Ø1.5"(38mm)x11"(27.9cm) -STAINLESS STEEL (FOR USE WITH HOSE CUFF & RING)
381185DA1DUSTING BRUSH -ALUMINUM SD* 5"(12.5cm) WITH CONDUCTIVE BRISTLES FOR USE WITH HOSE CUFF & RING
383462D1CONICAL NOZZLE ASSEMBLY w/CURVED TIP 10"(25cm)CONDUCTIVE RUBBER FOR HOSE CUFF&RING(383462M+381147D)
GROUNDING REEL - Opcional
Part#QtyDescription
2111911GROUNDING REEL WITH STAINLESS STEEL CABLE WITH AIRCRAFT GROUNDING CLAMP 50'(15m)

You are here