Tiger-Vac

Tel: (39) 051 79.53.52

TV-4 STD MFS

Dry Recovery Only


TV-4 STD MFS
Power: 5 HP OPT. 7.5 HP - The true IP 54/55 motor blowers

Certificaciones


ATEX 1st party certified

ce-mark ex_mark II 3 D Ex tc IIIB T160oC Dc IP54


  • Filtro HEPA Opcional: Con una eficacia de 99.995% sobre 0.3 micras. Probado según IEST RP-CC001.3. Clasificado H14 según el método MPPS de la norma EN 1822 y conforme a OSHA. Todos nuestros Aspiradores HEPA están Probados Contra Fugas con Aerosol antes de abandonar nuestras instalaciones
  • Versión para Categoría 3/EPL Gc Zona 2 (Gas) disponible
  • Incluye un silenciador para reducir el ruido
  • Manómetro incluido
  • Sacudidor de Filtro Manual (MFS)
  • Filtro Principal Lavable y Pre-Filtros en el interior de una Compartimento para Filtros extraíble
  • Diseñado para la recuperación de abestos (amianto), plomo, moho, etc
  • Motor trifásico de funcionamiento continuo. Este motor de inducción no contiene componentes de arco eléctrico
  • Disponible con motores de 5.5 CV (4 kws) - 7.5 CV (de 5.5 kws) (los motores son de excitación en serie)
  • Entrada de succión de Ø63.5mm (Ø2.5")- puede aceptar mangueras de succión de Ø50mm y Ø70mm
  • Para la recuperación de materias secas solamente
  • Completamente pintado en polvo (también el tanque de recuperación)
  • Equipado con una bolsa de polietileno y un clip de retención para una eliminación fácil y segura del material recuperado
  • Tanque de recuperación desmontable (DT) para una fácil eliminación del material recuperado
  • Accesorios y herramientas opcionales disponibles
  • kit de Taladradora Sin Polvo disponible

# de partenombreLimpieza del filtroPesoDimensionesRecuperación secapresión del vacíoAir Flow at Suction IntakeFase
112240B1TV-4 STD MFS Z22MFSN/AN/A62.5L3937 mm H2O374 m3/hThree
112241B1TV-4 STD MFS Z22MFS189 kgH175cm×W69cm×L117cm62.5L3810 mm H2O510 m3/hThree
# de partenombreCaballos de fuerzaAmperajePotencia en vatiosHercioVoltaje(Tension)Electrical Plug
112240B1TV-4 STD MFS Z225 HP9.25 A3700 W50 Hz400 VNot Inc.
112241B1TV-4 STD MFS Z227.5 HP11.6 A5500 W50 Hz400 VNot Inc.

HEPA

A HEPA filter is a type of air filter, which means it filters the air coming in or out of the vacuum cleaner system. It can remove at least 99.99% of dust, pollen, mould, bacteria and any other airborn particles with a size of 0.3 micron or larger.

North-America: Each HEPA Filter has a minimum filtration efficiency of 99.99% on 0.3 micron.  Tested as per IEST-RP-CC001.3 and OSHA compliant.

Europe: Each HEPA Filter has a minimum filtration efficiency of 99.995% on 0.3 micron, rated H14 as per EN 1822 by MPPS method.

Click here to download Tiger-Vac's HEPA Filter's standards chart.

ULPA

A ULPA filter is a type of air filter. It can remove at least 99.999% of dust, pollen, mould, bacteria and any other airborn particles with a size of 0.12 microns or larger.

North-America: Each ULPA Filter has a minimum filtration efficiency of 99.999% on 0.12 micron.  Tested as per IEST-RP-CC001.3.

Europe: Each ULPA Filter has a minimum filtration efficiency of 99.9995% on 0.18 micron, rated U15 as per EN 1822 by MPPS method.

MFS

MFS_top (illustration shows a top-mounted shaker)

The Manual Fitler Shaker system allows the operator to clean the main filter without having to open the vacuum cleaner.  This shaker System reduces maintenance down time.

The Manual Filter Shaker System consists of a spring action mechanism operating directly onto the filter cage located inside of the filter chamber. The system is operated by pressing on the ergonomic handle located on the side or top of the filter chamber.

The Manual Filter Shaker dislodges the accumulated caked-on dust from the filter thus improving the filter’s performance.

The filter, along with the filter cage, can be easily removed from the filter chamber and washed with lukewarm water and mild detergents.


Partes y Herramientas(Accesorios)

HEPA FILTER - Opcional
Part#QtyDescription
2122021HEPA FILTER (H14), 11"(28cm)
FILTERS - Included
Part#QtyDescription
2145591MAIN FILTER ASSEMBLY, PTFE LAMINATED, FOR MFS-17 STD 18.5"(470mm), INCLUDES RING AND CAGE
POLY LINER RECOVERY BAGS AND ACCESSORIES - Opcional
Part#QtyDescription
212374A16 mil POLY LINER WITH PRINT
2137801POLY LINER RETAINER PLATE ASSEMBLY (FOR USE WITH MOTORS UP TO 5HP)
TOOLS AND ACCESSORIES - Included
Part#QtyDescription
500131D1PVC CRUSHPROOF SUCTION HOSE ASSEMBLY, Ø2" x 15' (Ø50mm x 4.5m), FOR Ø2.5" CAMLOCK INTAKE
5002301CONICAL NOZZLE RUBBER SD* ASSEMBLY Ø2"(50mm)x7.5"(19cm) WITH Ø2"(50mm)PRESSURE FIT ALUM. CONNECTOR

You are here