Aspiradores Industriales ATEX Centrales, Hoppers, Pre-Seperators & Interceptor Drums
- Versiones prueba de Explosiones o versiones estandar disponibles.
- Disponibles con sacudidor de filtro manual (MFS) o con limpieza de filtro automatico (AFS) (APS)
- Disponibles tambien en Acero Inoxidable
Tiger-Vac propone una variedad de aspiradores practicos y abordables, al igual que sistemas completos de aspiracion,con una vasta gama de aplicaciones para la industria. Nosotros podemos ayudarle a concebir un aspirador central, que responda à sus éxigencias,encontrando en ellos las mas estrictas normas de seguridad y estandares de alta calidad.
Filtration Recovery Units
CDPU-5/7/10 EX
Electrically Operated
Electrically Operated
Power: 5-10 HP
Certificaciones
GUARANTEED to be capable of safely recovering combustible/conductive dusts &/or flammable liquids.
0081 
II 2 G/D Ex d IIB T4 Ex tD A21
IP6X - T135oC
LCIE 03 ATEX 6295
- Legally certified explosion proof/dust ignition proof by a recognized testing laboratory.
- Less than 10 Ohms of resistivity
- *Cleanroom compatible. Can be used in the pharmaceutical industry
- Continuous duty 3-phase explosion proof motor
- Power Unit can be attached to a Filtration System (FRS)
- Can be used as a mobile or central unit
- All stainless steel SAE construction
- Equipped with 4 wheels for easy manoeuverability. Can also be equipped with slots for fork lift capability
- Group E Motor (Metal Dust) and Switch available
- Other motor performances available
FRS-40/160L EX
Certificaciones
GUARANTEED to be capable of safely recovering combustible/conductive dusts &/or flammable liquids.
- For 5 to 10HP motor performance
- Stainless steel SAE 304 construction
- Compatible with CD-10 EX Series
- Automatic Purge (APS) filter cleaning system with 4 cartridges & 4 skirts Total Cartridge and Skirt filter surface area is: 142.44 ft² (132 323 cm²)
- *Cleanroom compatible. Can be used in the pharmaceutical industry
- Available non-explosion proof
- Recovery Capacity 40 gallons (160 litres)
FRS-63L EX EXTENDED
Certificaciones
GUARANTEED to be capable of safely recovering combustible/conductive dusts &/or flammable liquids.
- Stainless steel SAE 304 construction
- Compatible with CD-5/7 EX Series
- Extended Series
- Available with Manual (MRP) Reverse Purge Filter Cleaning System with 1 cartridge & skirt. Total Cartridge and Skirt surface area is: 27.4 ft² (25 500 cm²)
- Available with Automatic (APS) Purge Filter Cleaning System with 1 cartridge & skirt. Total Cartridge and Skirt surface area is: 65.5 ft² ( 60 810 cm²)
- *Cleanroom compatible. Can be used in the pharmaceutical industry
- Available non-explosion proof
- Recovery Capacity 15 gallons (63 litres)
FRS-10/40L EX
Certificaciones
GUARANTEED to be capable of safely recovering combustible/conductive dusts &/or flammable liquids.
- For 2.2 kW to 5 kW motor performance
- Stainless steel SAE 304 construction
- Compatible with CD-5 EX Series
- Manual Reverse Purge (MRP)
- Also Available with Automatic Purge (APS)
- Total surface area of SD* Reverse Purge Cartridge and Skirt is: 19.1 ft² (17 700 cm²) for MRP models
- Total surface area of SD* Reverse Purge Cartridge and Skirt is: 43.58 ft² (40 530 cm²) for APS models
- *Cleanroom compatible. Can be used in the pharmaceutical industry
- Available non-explosion proof
- Recovery Capacity 10 gallons (40 litres)
FRS-15/63L EX
Certificaciones
GUARANTEED to be capable of safely recovering combustible/conductive dusts &/or flammable liquids.
- For 2.2 kW to 5 kW motor performance
- Stainless steel AISI 304 construction
- AISI 316 Electropolished available
- Compatible with CD-5 EX Series
- Available with Manual (MRP) Reverse Purge Filter Cleaning System with 1 cartridge & skirt. Total Cartridge and Skirt surface area is: 19.1 ft² (17 700 cm²)
- Available with Automatic (APS) Purge Filter Cleaning System with 1 cartridge & skirt. Total Cartridge and Skirt surface area is: 43.58 ft² ( 40 530 cm²)
- *Cleanroom compatible. Can be used in the pharmaceutical industry
- Available non-explosion proof
- Recovery Capacity 15 gallons (63 litres)
Hoppers
HOPPER FRS-570 SS (APS)
- Stainless steel SAE 304 construction
- Less than 10 Ohms of resistivity
- *Cleanroom compatible. Can be used in the pharmaceutical industry
- Automatic Purge (APS) filter cleaning system with 4 cartridges & 4 skirts Total cartridge filter surface: 111 483 cm² (120 ft²)
- Total skirt filter surface: 20 840 cm² (22.44 ft²)
- total filter surface: 132 323 cm² (142.44 ft²)
- Available with a recovery drum (capacity of 40 gallons (160 liters)), Drum on a pallet or Super Bulk Bag on a pallet
- Also available non-explosion proof versions
Transfer Lid Assembly
TRANSFER LID ASSEMBLY
Certificaciones
GUARANTEED to be capable of safely recovering combustible/conductive dusts &/or flammable liquids.
- Legally certified explosion proof / dust ignition proof
- Stainless steel
- Designed for Open Top Drum Filling. Can also be used for nuclear applications
- For liquid recovery
- Can be mounted on a standard 55 gallon drum
- Must be attached to an explosion proof / dust ignition proof power source
Primary Cyclonic Transfer Drum
PRIMARY CYCLONIC TRANSFER DRUM ADAPATOR
Certificaciones
GUARANTEED to be capable of safely recovering combustible/conductive dusts &/or flammable liquids.
- Legally certified explosion proof / dust ignition proof
- Stainless steel
- Designed for bulk and granular recovery
- For dry recovery only
- Can be mounted on a standard 55 gallon drum
- Must be attached to an explosion proof / dust ignition proof power source
Interceptor Units
INT-55 TC EX (MRAC)
Certificaciones
GUARANTEED to be capable of safely recovering combustible/conductive dusts &/or flammable liquids.
- Less than 10 Ohms of resistivity
- *Cleanroom compatible. Can be used in the pharmaceutical industry
- Designed for the recovery of flammable liquids
- For wet & dry recovery
- All stainless steel SAE 304
- Contains a Middle Ring with Activated Carbon for the adsorption of toxic/nuisance fumes & vapors
- Recovery capacity of 45 gallons (171 liters)
- Drain valve for easy disposal of recovered materials
- Based on a 4-wheel tilting cart (TC) to allow for easy emptying of recovered materials
- Includes a static dissipating suction hose assembly and connection hose assembly
AC-25 (4W) EX
Certificaciones
GUARANTEED to be capable of safely recovering combustible/conductive dusts &/or flammable liquids.
·Legalmente certificado por un laboratorio de pruebas.
.A prueba de ignición de polvo explosivo
·Menos de 10 Ohm de resistencia
·*Compatible para salas blancas y en la Industria Farmaceutica.
·Diseñado para absorción de vapores tóxicos,humo y olores
·Para recuperacion Humeda y Seca
·Todo en acero inoxidable SAE 304
El tanque contiene 55 libras (25 kilos) de bolas activadas de carbón
·Basado sobre un carro de 4 ruedas
Incluye una resistente Manguera de conexioncon disipacion estatica.
IT-55 (4W) EX
Certificaciones
GUARANTEED to be capable of safely recovering combustible/conductive dusts &/or flammable liquids.
- Less than 10 Ohms of resistivity
- *Cleanroom compatible. Can be used in the pharmaceutical industry
- Designed for the recovery and neutralization of conductive and explosive dust into a liquid immersion bath
- All stainless steel SAE 304
- Recovery capacity of 5 gallon (19 liters) of dust into 25 gallons (95 liters) of neutralizing liquid
- Drain valve for easy disposal of recovered materials
- Based on a 4-Wheel dolly
- Includes a static dissipating connection hose
INT-55 (4W) EX
Certificaciones
GUARANTEED to be capable of safely recovering combustible/conductive dusts &/or flammable liquids.
- Less than 10 Ohms of resistivity
- *Cleanroom compatible. Can be used in the pharmaceutical industry
- Designed for the recovery of flammable liquids
- For wet & dry recovery
- All stainless steel SAE 304
- Recovery capacity of 45 gallons (171 liters)
- Drain valve for easy disposal of recovered materials
- Based on a 4-Wheel dolly
- Includes a static dissipating suction hose assembly and connection hose assembly
IT-25 (4W) EX
Certificaciones
GUARANTEED to be capable of safely recovering combustible/conductive dusts &/or flammable liquids.
- Designed for the recovery and neutralization of conductive and explosive dust into a liquid immersion bath
- Less than 10 Ohms of resistivity
- *Cleanroom compatible. Can be used in the pharmaceutical industry
- All stainless steel SAE 304
- Recovery capacity of 1 gallon (4 liters) of dust into 5 gallons (20 liters) of neutralizing liquid
- Drain valve for easy disposal of recovered materials
- Based on a 4-Wheel dolly
- Coalescing Filter Element (CFE) for moisture removal - optional
- Strainer Basket for mud recovery - optional
- Includes a Kanaflex Connection Hose, SD*
- Accessories available
IT-114L (4W) EX
Certificaciones
GUARANTEED to be capable of safely recovering combustible/conductive dusts &/or flammable liquids.
- Less than 10 Ohms of resistivity
- *Cleanroom compatible. Can be used in the pharmaceutical industry
- Designed for the recovery and neutralization of conductive and explosive dust into a liquid immersion bath
- All stainless steel SAE 304
- Recovery capacity of 2.5 gallon (10 liters) of dust into 12.5 gallons (50 liters) of neutralizing liquid
- Drain valve for easy disposal of recovered materials
- Based on a 4-Wheel dolly
- Includes a static dissipating connection hose
Primary Cyclonic Seperators
PCS-114L EX
Certificaciones
GUARANTEED to be capable of safely recovering combustible/conductive dusts &/or flammable liquids.
- Legally certified explosion proof/dust ignition proof recovery unit
- Less than 10 Ohms of resistivity
- For general cleanup in hazardous locations
- Less than 8 ft³
- Optional Rupture Disc available
- For dry recovery only
- All stainless steel construction(except cart)
- Recovery tank capacity of 30 gallons (114 liters)
- Based on an Open-Front Drum Dolly for easy manoeuverability
- Optional forklift capability
- Includes Connection Hose Assembly
PCS-60L (MBS) EX
Certificaciones
GUARANTEED to be capable of safely recovering combustible/conductive dusts &/or flammable liquids.
- Legally certified explosion proof/dust ignition proof recovery unit
- Less than 10 Ohms of resistivity
- For general cleanup in hazardous locations
- Less than 8 ft³
- Optional Rupture Disc available
- For dry recovery only
- All stainless steel construction(except cart)
- Multi Bag Collection System
- Forklift capability
- Includes Connection Hose Assembly
Notas:
- Los filtros HEPA tienen una eficacia de 99,995% sobre los 0,3 microns - Probado IEST RP-CC001.3 - H14 SIPM segun el metodo EN 1822.
- Filtros ULPA -tienen una eficacia de 99,999% sobre los 0,3 microns - tienen eficacia de filtracion de 99,9995% à 0,18 microns - Probado IEST RP-CC001.3 - U15 SIPM segun el metodo EN 1822
- Todos los filtros HEPA / ULPA de Tiger-Vac son probados DOP cuando son instalados, ya sea à favos del aire o en contra del aire, dentro del aspirador.
- Todos los filtros hepa HEPA / ULPA de Tiger-Vac son ensamblados unicamente con 3 pernos incluidos.un empaque espécialemente hecho con le fin de prevenir las fugas durante la duracion del filtro para asegurar la salud y seguridad del utilizador final.
