Información rápida

• Legally certified explosion proof/dust ignition proof by a recognized testing laboratory
• Less than 10 Ohms of resistivity
• HEPA Filtro - Incluido con una eficacia del 99.995 % sobre 0.3 micras. Probado: IEST RP-CC001.3. H14 por método MPPS según EN 1822. O Filtro de ULPA - Opcional con una eficacia del 99.999 % sobre 0.12 micras. Probado: IEST RP-CC001.3. Eficacia de filtración del 99.9995 % sobre 0.18 micras. Probado: IEST RP-CC001.3. U15 por método MPPS según EN 1822.
• *Cleanroom compatible.  Can be used in the pharmaceutical industry
• For general cleanup in hazardous locations
• Single phase explosion proof/dust ignition proof motor
• For wet and dry recovery
• All stainless steel SAE 304 construction (except cart).  Stainless steel cart available
• Recovery tank capacity of 10 - 55 gallons (38 - 209 liters)
• Optional polyliner and clip available for easy and safe disposal of recovered materials
• Based on an SD* 4-wheel dolly or on an SD* 4-wheel tilting cart (TC) to allow for easy emptying of recovered materials
• Complete static dissipating tool kit and suction hose included

SD* Static Dissipative

Detalles

All stainless steel SAE 304 construction (except cart).  Less than 10 Ohms of resistivity.  This unit is equipped with a true HEPA Filter (H14) located downstream of the motor.  This unit can be used for general maintenance in hazardous locations.  These are wet & dry vacuum cleaners.  Recovery capacity of between 10 to 55 gallons (38 to 209 liters).  All of our HEPA vacuum cleaner are Aerosol Leak Tested before leaving our facility.

Folletos y Certificados

Name	Description	Download
EXP1-10 TO 55 RE SERIES Brochure (Metric)	Technical data for EXP1-10 TO 55 RE SERIES in metric units (Millimeters, Kilograms...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
EXP1-10 TO 55 RE SERIES Brochure (Imperial)	Technical data for EXP1-10 TO 55 RE SERIES in imperial units (Inches, Pounds...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
ATEX Vacuum Cleaners electrically operated singlephase T3	Certification Document	descargar

Información rápida

• Legally certified explosion proof/dust ignition proof by a recognized testing laboratory
• Less than 10 Ohms of resistivity
• Fltro HEPA - Incluido con una eficacia de 99.995% sobre 0.3 micras comprobado. IEST RP-CC001.3.H14 por MPPS segun el metodo EN 1822
• *Cleanroom compatible.  Can be used in the pharmaceutical industry
• For general cleanup in hazardous locations
• Single phase explosion proof/dust ignition proof motor
• For dry recovery only.  Optional floater system available for liquid recovery
• All stainless steel SAE 304 construction
• Recovery capacity of 10.5 gallons (40 liters)
• Optional SD* polyliner and clip available for easy and safe disposal of recovered materials
• Equipped with an SD* 4-wheel dolly for easy manoeuverability
• Complete static dissipating tool kit and suction hose included

SD* Static Dissipative

Detalles

All stainless steel SAE 304 construction.  Less than 10 Ohms of resistivity.  This unit is equipped with a true HEPA (H14) Filter located downstream of the motor.  This unit is cleanroom compatible and can be used in the pharmaceutical industry.  This unit can be used for general cleanup in hazardous locations.  This is a dry recovery only vacuum cleaner.  An optional Floater System can be installed for liquid recovery.  All of our HEPA vacuum cleaners are Aerosol Leak Tested before leaving our facility

Folletos y Certificados

Name	Description	Download
EXP1-40L RE HEPA (MR) Brochure (Metric)	Technical data for EXP1-40L RE HEPA (MR) in metric units (Millimeters, Kilograms...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
EXP1-40L RE HEPA (MR) Brochure (Imperial)	Technical data for EXP1-40L RE HEPA (MR) in imperial units (Inches, Pounds...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
ATEX Vacuum Cleaners electrically operated singlephase T3	Certification Document	descargar

Información rápida

• Legally certified explosion proof/dust ignition proof by a recognized testing laboratory
• Less than 10 Ohms of resistivity
• Fltro HEPA - Incluido con una eficacia de 99.995% sobre 0.3 micras comprobado. IEST RP-CC001.3.H14 por MPPS segun el metodo EN 1822
• *Cleanroom compatible.  Can be used in the pharmaceutical industry with optional stainless steel cart
• Designed for applications where finely pulverized dust is to be recovered
• Single phase explosion proof/dust ignition proof motor
• Available with Manual Filter Shaker (MFS) system
• For dry recovery only
• All stainless steel SAE 304 construction (except cart).  Stainless steel cart available
• Detachable recovery tank (DT).  Recovery capacity of 6.25 gallons (25 liters)
• Equipped with an SD* polyliner and clip for easy and safe disposal of recovered materials
• Equipped with an SD* 4-wheel cart and tool basket
• Complete static dissipating tool kit and suction hose included

SD* Static Disspative

Detalles

All stainless steel SAE 304 construction (except cart).  Less than 10 Ohms of resistivity.  This unit is equipped with a true HEPA (H14) Filter located downstream of the motor.  This unit is cleanroom compatible and can be used in the phamaceutical industry when equipped with an optional stainless steel cart.  This unit has been designed for applications where finely pulverized dust is to be recovered.  This dry only unit contains a Manual Filter Shaker (MFS) system.  All of our HEPA vacuum cleaners are Aerosol Leak Tested before leaving our facility.

Folletos y Certificados

Name	Description	Download
EXP1-20L (DT) RE HEPA (MFS) Brochure (Metric)	Technical data for EXP1-20L (DT) RE HEPA (MFS) in metric units (Millimeters, Kilograms...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
EXP1-20L (DT) RE HEPA (MFS) Brochure (Imperial)	Technical data for EXP1-20L (DT) RE HEPA (MFS) in imperial units (Inches, Pounds...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
ATEX Vacuum Cleaners electrically operated singlephase T3	Certification Document	descargar

Información rápida

• Legally certified explosion proof/dust ignition proof by a recognized testing laboratory
• Less than 10 Ohms of resistivity
• Fltro HEPA - Incluido con una eficacia de 99.995% sobre 0.3 micras comprobado. IEST RP-CC001.3.H14 por MPPS segun el metodo EN 1822
• *Cleanroom compatible.  Can be used in the pharmaceutical industry with optional stainless steel cart
• Designed for applications where finely pulverized dust is to be recovered
• Single phase explosion proof/dust ignition proof motor
• Available with Manual Filter Shaker (MFS) system
• For dry recovery only
• All stainless steel SAE 304 construction (except cart).  Stainless steel cart available
• Detachable recovery tank (DT).  Recovery capacity of 8.75 gallons (35 liters)
• Equipped with an SD* polyliner and clip for easy and safe disposal of recovered materials
• Equipped with an SD* 4-wheel cart and tool basket
• Complete static dissipating tool kit and suction hose included

SD* Static Dissipative

Detalles

All stainless steel SAE 304 construction (except cart).  Less than 10 Ohms of resistivity.  This unit is equipped with a true HEPA (H14) Filter located downstream of the motor.  This unit is cleanroom compatible and can be used in the pharmaceutical industry when equipped with an optional stainless steel cart.  This unit has been designed for applications where finely pulverized dust is to be recovered.  This dry only unit contains a Manual Filter Shaker (MFS) system.  All of our HEPA vacuum cleaners are Aerosol Leak Tested before leaving our facility.

Folletos y Certificados

Name	Description	Download
EXP1-35L (DT) RE HEPA (MFS) Brochure (Metric)	Technical data for EXP1-35L (DT) RE HEPA (MFS) in metric units (Millimeters, Kilograms...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
EXP1-35L (DT) RE HEPA (MFS) Brochure (Imperial)	Technical data for EXP1-35L (DT) RE HEPA (MFS) in imperial units (Inches, Pounds...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
ATEX Vacuum Cleaners electrically operated singlephase T3	Certification Document	descargar
Certificate of Compliance	CSA Certificate of Compliance	descargar

Información rápida

• Legally certified explosion proof/dust ignition proof by a recognized testing laboratory
• Less than 10 Ohms of resistivity
• Fltro HEPA - Incluido con una eficacia de 99.995% sobre 0.3 micras comprobado. IEST RP-CC001.3.H14 por MPPS segun el metodo EN 1822
• *Cleanroom compatible.  Can be used in the pharmaceutical industry with optional stainless steel cart
• Designed for applications where finely pulverized dust is to be recovered
• Single phase explosion proof/dust ignition proof motor
• Available with Manual Reverse Purge ((MRP)) system
• For dry recovery only
• All stainless steel SAE 304 construction (except cart).  Stainless steel cart available
• Detachable recovery tank (DT).  Recovery capacity of 8.75 gallons (35 liters)
• Equipped with an SD* polyliner and clip for easy and safe disposal of recovered materials
• Equipped with an SD* 4-wheel cart and tool basket
• Complete static dissipating tool kit and suction hose included

SD* Static Dissipative

Detalles

All stainless steel SAE 304 construction (except cart).  Less than 10 Ohms of resistivity.  This unit is equipped with a true HEPA (H14) Filter located downstream of the motor.  This unit is cleanroom compatible and can be used in the pharmaceutical industry when equipped with an optional stainless steel cart.  This unit has been designed for applications where finely pulverized dust is to be recovered.  This dry only unit contains a Manual Reverse Purge ((MRP)) system.  All of our HEPA vacuum cleaners are Aerosol Leak Tested before leaving our facility

Folletos y Certificados

Name	Description	Download
EXP1-35L (DT) RE HEPA (MRP) Brochure (Metric)	Technical data for EXP1-35L (DT) RE HEPA (MRP) in metric units (Millimeters, Kilograms...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
EXP1-35L (DT) RE HEPA (MRP) Brochure (Imperial)	Technical data for EXP1-35L (DT) RE HEPA (MRP) in imperial units (Inches, Pounds...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
ATEX Vacuum Cleaners electrically operated singlephase T3	Certification Document	descargar
Certificate of Compliance	CSA Certificate of Compliance	descargar

Información rápida

• Legally certified explosion proof/dust ignition proof by a recognized testing laboratory
• Less than 10 Ohms of resistivity
• HEPA Filtro - Opcional con una eficacia del 99.995 % sobre 0.3 micras. Probado: IEST RP-CC001.3. H14 por método MPPS según EN 1822
• For general cleanup in hazardous locations
• Continuous duty Single and 3-phase explosion proof/dust ignition proof motor
• Available with Manual Filter Shaker (MFS)
• For dry Recovery only
• All stainless steel SAE 304 construction (except cart)
• Detachable recovery tank (DT) for easy disposal of recovered materials.  Recovery capacity of 6.5 gallons (25 liters)
• Equipped with a 4-wheel cart for easy manoeuverability

Detalles

All stainless steel SAE 304 construction (except cart).  Housing Less Mounted Top (HLMT) design.  Less than 10 Ohms of resistivity.  This unit is available with an optional true HEPA (H14) Filter.  This unit can be used for general maintenance in hazardous locations.  This dry recovery only unit contains a Manual Filter Shaker (MFS) system.  This unit has a powerful suction and has been designed for industrial applications.

Folletos y Certificados

Name	Description	Download
EUR/HLMT-20L EX DT (MFS) Brochure (Metric)	Technical data for EUR/HLMT-20L EX DT (MFS) in metric units (Millimeters, Kilograms...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
EUR/HLMT-20L EX DT (MFS) Brochure (Imperial)	Technical data for EUR/HLMT-20L EX DT (MFS) in imperial units (Inches, Pounds...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
ATEX Vacuum Cleaners electrically operated triphase to be used in Hazardous Areas	Certification Document	descargar

Información rápida

· prueba de ignición de polvo explosivo. Certificada legalmente por un laboratorio de pruebas. ·Menos de 10 Ohm de resistencia ·Compatible para Salas Blancas. Puede ser usado en la industria farmacéutica con el carro de acero inoxidable opcional ·para limpieza general en posiciones(ubicaciones) peligrosas ·Para trabajos a prueba de ignición de polvo explosivo. . Con Motores Monofasicos o trifasicos (TEFC) ·Disponibles con Sacudidor Manual Manual (MFS) con Teflon Conductivo (PTFE) y en poliester (H13) · Recuperación solamente ·Todo en acero inoxidable SAE 304 excepto la carretilla ·Carretilla con motor suspendido. (CSMT) .Tanque de recuperacion deslisable (DT). Capacidad de recuperación de 6.6 galones (25 litros) ·Equipped con una bolsa conductiva (polyliner)SD* y clip para disposición fácil y securitaria del material recuperado ·Equipado con un carro conductivo SD* de 4 ruedas y Deposito para los Accesorios. SD* Libre de Electricidad Estatica.

Detalles

Todo en acero inoxidable SAE 304 (excepto carro). Menos de 10 Ohm de resistencia. Esta unidad esta equipada con un Filtro de ULPA verdadero (U15) localizado abajo del motor. Esta unidad es compatible en salas blancas y puede ser usada en la industria farmacéutica cuando esta equipada con un carro de acero inoxidable opcional y el Filtro de ULPA (U15). Esta unidad puede ser usada para el mantenimiento general en posiciones(ubicaciones) peligrosas. Esta hecha para recuperación seca sólamente la unidad contiene un sistema de Purgado Manual Inverso ((MRP)). Todas nuestras aspiradoras HEPA/ULPA son Probadas antes de la salida de nuestras instalaciones.

Folletos y Certificados

Name	Description	Download
CD/EUR-25L EX DT (MFS) Brochure (Metric)	Technical data for CD/EUR-25L EX DT (MFS) in metric units (Millimeters, Kilograms...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
CD/EUR-25L EX DT (MFS) Brochure (Imperial)	Technical data for CD/EUR-25L EX DT (MFS) in imperial units (Inches, Pounds...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
ATEX Vacuum Cleaners electrically operated triphase to be used in Hazardous Areas	Certification Document	descargar

Información rápida

·Legalmente puesto a prueba de ignición de polvos explosivos.Certificada por un laboratorio de pruebas ·Monofasico (TEFC) motor para trabajo continuo. 115/230 voltios, 50/60 Hz, 1-2 CV (1-1.5 kws). Motor Trifasico disponible ·Menos de 10 Ohm de resistencia. · *Tambien compatible para salas Blancas . Puede ser usado en la industria farmacéutica con el carro de acero inoxidable opcional SAE 304 · Con Sacudidor de filtro Manual (MFS) con SD* Teflon laminado y filtro de Tela Principal ensamblado y Prefiltro de Dralon. ·Todo en acero inoxidable SAE 304 construcción · Tanque de recuperación deslisable (DT). Capacidad de recuperación de 9.2 galones (35 litros) ·Equipado con una bolsa plastica conductiva SD* y clip para disposición fácil y segura de materiales recuperados ·Equipado con un Carro Para Mantener el motor suspendido. (CSMT) y deposito para los Accesorios. Incluye ruedas estáticas conductivas. ·Optional Ø 1.5" (Ø 38mm) o Ø 2 " (Ø 50mm) accesorios disponibles según necesidades ·Dimesiones: SD*Sin Electricidad Estática

Detalles

Todo en acero inoxidable SAE 304 (excepto carro). Menos de 10 Ohm de resistencia. Esta unidad esta equipada con un filtro ULPA (U15) el Filtro esta localizado por debajo del motor. Esta unidad es compatible en salas blancas y puede ser usada en la industria farmacéutica cuando esta equipado con un carro de acero inoxidable opcional. Esta unidad puede ser usada para el mantenimiento general en posiciones(ubicaciones) peligrosas. Para recuperación seca, contiene un sacudidor Manual Con filtro (MFS) el sistema. Este modelo vertical ha sido diseñado para ser usado en áreas con espacio reducido y donde requieren el poder de gran succión . Todas nuestras aspiradoras ULPA son Probadas con un aerosol antes de la salida de nuestra fabrica.

Folletos y Certificados

Name	Description	Download
CD/EUR-36L EX DT (MFS) ULPA Brochure (Metric)	Technical data for CD/EUR-36L EX DT (MFS) ULPA in metric units (Millimeters, Kilograms...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
CD/EUR-36L EX DT (MFS) ULPA Brochure (Imperial)	Technical data for CD/EUR-36L EX DT (MFS) ULPA in imperial units (Inches, Pounds...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
ATEX Vacuum Cleaners electrically operated triphase to be used in Hazardous Areas	Certification Document	descargar

Información rápida

A prueba de ignición de polvo explosivo .Certificada legalmente por un laboratorio de pruebas. ·Monofasico (TEFC) motor de uso continuo. · 115/230 volts 50/60 Hz, 1-2 Caballos de Fuerza (1-1.5 kws). · Motor Trifasico. disponible ·Menos de 10 Ohm de resistencia · Compatible en Salas Blancas . Puede ser usado en la industria farmacéutica con el carro de acero inoxidable opcional SAE 304 .Con Purgado Manual Inverso · ((MRP)) Libre de Electricidad Estatica SD* Purga el Cartucho y el Pre-filtro que lo cubre. · ·Todo en acero inoxidable SAE 304 construcción (excepto carro) ·Tanque de recuperación Deslisable (DT). · capacidad de Recuperación de ·9.2 galones (35 litros) ·Equipado con una bolsa plastica conductiva. SD* y clip para disposición fácil y segura del material recuperado. ·Equipado con un Carro que mantiene el motor suspendido y un deposito para los Accesorios. Incluye ruedas estáticas conductivas ·Optional Ø 1.5" (Ø 38mm) o Ø 2 " (Ø 50mm) accesorios disponibles según necesidades. · ·SD* Sin Electricidad Estática.

Detalles

Todo enl acero inoxidable SAE 304 construcción (excepto carro). Menos de 10 Ohm de resistencia. Esta unidad está disponible con ULPA verdadero (U15) el Filtro esta localizado debajo del motor. Esta unidad es compatible para salas blancas y puede ser usada en la industria farmacéutica cuando esta equipado con un carro de acero inoxidable opcional. Esta unidad puede ser usada para el mantenimiento general en posiciones(ubicaciones) peligrosas.Para recuperación seca sólamente la unidad contiene un sistema de Purgado Manual Inverso ((MRP)). Este modelo vertical ha sido diseñado para ser usado en el área con el espacio restringido y donde requieren un gran poder de succion. Todas nuestras aspiradoras ULPA han sido Probadas antes de la salida de nuestra fabrica.

Folletos y Certificados

Name	Description	Download
CD/EUR-36L EX DT (MRP) ULPA Brochure (Metric)	Technical data for CD/EUR-36L EX DT (MRP) ULPA in metric units (Millimeters, Kilograms...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
CD/EUR-36L EX DT (MRP) ULPA Brochure (Imperial)	Technical data for CD/EUR-36L EX DT (MRP) ULPA in imperial units (Inches, Pounds...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
ATEX Vacuum Cleaners electrically operated triphase to be used in Hazardous Areas	Certification Document	descargar

Información rápida

·Aprueba de ignición de polvo explosivo. .Certificada Legalmente por un laboratorio de pruebas. ·Menos de 10 Ohm de resistencia .Compatible con Salas Blancas. . Puede ser usado en la industria farmacéutica con el carro de acero inoxidable opcional .Para Limpieza general en posicione peligrosas ·MotorContinuo prueba de ignición de polvo explosivo. .Trifasico · Disponible con Filtro de Purgado Automático Inverso (ARP) Limpieza de sistema con 1 cartucho y 1 falda. La superficie total Con filtro de Cartucho y Falda para el modelo de ARP en pies ² (en cm ²) · Recuperación Seca sólamente ·Todo en acero inoxidable SAE 304 construcción ·Tanque de recuperación Deslisable (DT). Capacidad de recuperación de 13 galones (50 litros) ·Equipado con una bolsa plastica conductiva. SD* y clip para disposición fácil y segura de los materiales recuperados. ·Equipado con un carro SD* de 4 ruedas para moverlo con facilidad.

Detalles

Todo en acero inoxidable SAE 304 construcción (excepto carro). Menos de 10 Ohm de resistencia. Esta unidad está disponible con HEPA opcional verdadero (H14) / ULPA (U15) el Filtro localizado debajo del motor. Esta unidad es compatible para salas blancas y puede ser usada en la industria farmacéutica cuando esta equipado con un carro de acero inoxidable opcional. Esta unidad puede ser usada para el mantenimiento general en posiciones(ubicaciones) peligrosas. Para recuperación seca sólamente la unidad cuenta con un sistema de Purgado Automático Inverso (ARP). Todas nuestras aspiradoras HEPA/ULPA son Probadas con aerosol antes de la salida de nuestra fabrica.

Folletos y Certificados

Name	Description	Download
CD/EUR-50L EX DT (ARP) ULPA Brochure (Metric)	Technical data for CD/EUR-50L EX DT (ARP) ULPA in metric units (Millimeters, Kilograms...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
CD/EUR-50L EX DT (ARP) ULPA Brochure (Imperial)	Technical data for CD/EUR-50L EX DT (ARP) ULPA in imperial units (Inches, Pounds...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
ATEX Vacuum Cleaners electrically operated triphase to be used in Hazardous Areas	Certification Document	descargar

Información rápida

·A prueba de ignición de polvo explosivo.Certificada Legalmente por un laboratorio de pruebas ·Trifasico (TEFC) motor de uso continuo. · 230/400/460/575 voltios, 50/60 Hz, 5 CV (4 kws) ·Menos de 10 Ohm de resistencia. · *Compatible con Salas Blancas . · Puede ser usado ·en la la industria farmacéutica con el carro de acero inoxidable opcional SAE 304 ·Con Sacudidor de Filtro Manual · (MFS) c SD* Teflon laminado en el Filtro Principal y el Prefiltro de Dralon. · la superficie Total es: · ·Todo en acero inoxidable SAE 304 construcción (excepto carro) ·Tanque de recuperación Deslisable(DT). · capacidad de Recuperación of·13.2 galones (50 litros) ·Equipado con una bolsa plastica conductiva SD* y clip para disposición fácil y segura de materiales recuperados. ·Equipado con un Carro para mantener el motor suspendido. (CSMT) y Deposito para los Accesorios. · Incluye ruedas estáticas conductivas. ·Optional Ø 1.5" (Ø 38mm) o Ø 2 " (Ø 50mm) accesorios disponibles según necesidades.

Detalles

Todo en acero inoxidable SAE 304 construcción (excepto carro). Menos de 10 Ohm de resistencia. Esta unidad esta equipada con un filtro ULPA (U15) localizado debajo del motor. Esta unidad es compatible en Salas Blancas y puede ser usada en la industria farmacéutica cuando esta equipada con un carro de acero inoxidable opcional. Esta unidad puede ser usada para el mantenimiento general en posiciones(ubicaciones) peligrosas.Para recuperación seca sólamente.Contiene un sacudidor de filtro manual (MFS). Este modelo vertical ha sido diseñado para ser usado en áreas con el espacio reducidos y donde requieren el poder de succión grande. Todas nuestras aspiradoras ULPA son probadas con Aerosol antes de la salida de nuestra fabrica.

Folletos y Certificados

Name	Description	Download
CD/EUR-50L EX DT (MFS) ULPA Brochure (Metric)	Technical data for CD/EUR-50L EX DT (MFS) ULPA in metric units (Millimeters, Kilograms...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
CD/EUR-50L EX DT (MFS) ULPA Brochure (Imperial)	Technical data for CD/EUR-50L EX DT (MFS) ULPA in imperial units (Inches, Pounds...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
ATEX Vacuum Cleaners electrically operated triphase to be used in Hazardous Areas	Certification Document	descargar

Información rápida

·A prueba de ignición de polvo de explosivo certificada legalmente por un laboratorio de pruebas. ·Trifasico (TEFC) motor de uso continuo. · 230/400/460/575 voltios, 50/60 Hz, 5 CV (4 kws) ·Menos de 10 Ohm de resistencia · compatible para Salas Blancas. · Puede ser usado en la industria farmacéutica con el carro de acero inoxidable opcional SAE 304 ·Purgado Mnual Inverso · ((MRP)) con el Cartucho de Filtro de Purga de Revés de SD* y Bordean la superficie · Total es: · · Purgado Automatico Inverso (ARP) Este Sistema está disponible ·Todo en acero inoxidable SAE 304 construcción (excepto carro) ·Tanque de recuperación Deslisable (DT). · capacidad de Recuperación of·13.2 galones (50 litros) ·Equipado con una bolsa plastica conductiva. SD* y clip para disposición fácil y segura de materiales recuperados ·Equipado con un Carro para mantener el motos suspendido.(CSMT) y deposito para los Accesorios,ncluye ruedas estáticas conductivas. ·Optional Ø 1.5" (Ø 38mm) o Ø 2 " (Ø 50mm) accesorios disponibles según las necesidades.

Detalles

Todo en acero inoxidable SAE 304 construcción (excepto carro). Menos de 10 Ohm de resistencia. Esta unidad esta equipada conun filtro ULPA (U15) localizado debajo del motor. Esta unidad es compatible para Salas Blancas y puede ser usada en la industria farmacéutica cuando esta equipada con un carro de acero inoxidable opcional. Esta unidad puede ser usada para el mantenimiento general en posiciones(ubicaciones) peligrosas.Para recuperación seca sólamente la unidad contiene un sistema manual de Purgado Inverso((MRP)) el sistema. Este modelo vertical ha sido diseñado para ser usado en áreas con el espacio reducido y donde requieren el poder de succión grande. Todas nuestras aspiradoras HEPA/ULPA han sido probadas co Aerosol antes de la salida de nuestras Instalacones.

Folletos y Certificados

Name	Description	Download
CD/EUR-50L EX DT (MRP) ULPA Brochure (Metric)	Technical data for CD/EUR-50L EX DT (MRP) ULPA in metric units (Millimeters, Kilograms...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
CD/EUR-50L EX DT (MRP) ULPA Brochure (Imperial)	Technical data for CD/EUR-50L EX DT (MRP) ULPA in imperial units (Inches, Pounds...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
ATEX Vacuum Cleaners electrically operated triphase to be used in Hazardous Areas	Certification Document	descargar

Información rápida

Legalmente certificada por un laboratorio de pruebas autorizado ·Menos de 10 Ohm de resistencia · HEPA Filtro - Opcional con una eficacia del 99.995 % sobre 0.3 micras. Probado: IEST RP-CC001.3. H14 por método MPPS según EN 1822. O Filtro de ULPA - Opcional con una eficacia del 99.999 % sobre 0.12 micras. Probado: IEST RP-CC001.3. Eficacia de filtración del 99.9995 % sobre 0.18 micras. Probado: IEST RP-CC001.3. U15 por método MPPS según EN 1822. · *Para salas blancas · Diseñado para limpieza general ·Puede ser usado para la recuperación de pastillas en la industria farmacéutica · Motor a prueba de ignición de polvo explosivo de 3 fases ·Equipado con filtros de papel y disponibles con filtro HEPA/ULPA- Capacidad de recuperación de 2 galones (de 8 litros) ·Disponible como unidad fija o móvil ·Para recuperacion seca solamente ·Todo en acero inoxidable SAE 304 ·Con capacidad de recuperacion de 5 galones (19 litros) ·Equipado con 4 ruedas

Detalles

Tiger-Vac presenta la línea más reciente de aspiradoras diseñadas para limpieza general y para la Industria de alimentos. Esta unidad también puede ser usada para la recuperación de pastillas en la industria farmacéutica. . Esta unidad está disponible con HEPA verdadero (H14) / ULPA (U15) el Filtro fuera del alojamiento de motor. · La aspiradora esta montada sobre 4 ruedas con cerraduras para maniobrar fácilmente y facilitar el acceso al tratamiento del equipo cuando se utiliza como una unidad móvil. · montaje Vertical para áreas con espacios reducidos . Todas nuestras aspiradoras ULPA son probadas con aerosol antes de salir de nuestras instalaciones.

Folletos y Certificados

Name	Description	Download
CD-1500 EX CR Brochure (Metric)	Technical data for CD-1500 EX CR in metric units (Millimeters, Kilograms...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
CD-1500 EX CR Brochure (Imperial)	Technical data for CD-1500 EX CR in imperial units (Inches, Pounds...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
ATEX Vacuum Cleaners electrically operated triphase to be used in Hazardous Areas	Certification Document	descargar

Información rápida

Legalmente certificada por un laboratorio de pruebas autorizado ·Menos de 10 Ohm de resistencia · HEPA Filtro - Opcional con una eficacia del 99.995 % sobre 0.3 micras. Probado: IEST RP-CC001.3. H14 por método MPPS según EN 1822. O Filtro de ULPA - Opcional con una eficacia del 99.999 % sobre 0.12 micras. Probado: IEST RP-CC001.3. Eficacia de filtración del 99.9995 % sobre 0.18 micras. Probado: IEST RP-CC001.3. U15 por método MPPS según EN 1822. · *Para salas blancas · Diseñado para limpieza general ·Puede ser usado para la recuperación de pastillas en la industria farmacéutica · Motor a prueba de ignición de polvo explosivo de 3 fases ·Equipado con filtros de papel y disponibles con filtro HEPA/ULPA- Capacidad de recuperación de 2 galones (de 8 litros) ·Disponible como unidad fija o móvil ·Para recuperacion seca solamente ·Todo en acero inoxidable SAE 304 ·Con capacidad de recuperacion de 5 galones (19 litros) ·Equipado con 4 ruedas

Detalles

Tiger-Vac presenta la línea más reciente de aspiradoras diseñadas para limpieza general y para la Industria de alimentos. Esta unidad también puede ser usada para la recuperación de pastillas en la industria farmacéutica. . Esta unidad está disponible con HEPA verdadero (H14) / ULPA (U15) el Filtro fuera del alojamiento de motor. · La aspiradora esta montada sobre 4 ruedas con cerraduras para maniobrar fácilmente y facilitar el acceso al tratamiento del equipo cuando se utiliza como una unidad móvil. · montaje Vertical para áreas con espacios reducidos . Todas nuestras aspiradoras ULPA son probadas con aerosol antes de salir de nuestras instalaciones.

Folletos y Certificados

Name	Description	Download
CD-1501 EX CR Brochure (Metric)	Technical data for CD-1501 EX CR in metric units (Millimeters, Kilograms...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
CD-1501 EX CR Brochure (Imperial)	Technical data for CD-1501 EX CR in imperial units (Inches, Pounds...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
ATEX Vacuum Cleaners electrically operated triphase to be used in Hazardous Areas	Certification Document	descargar

Información rápida

• Legally certified explosion proof/dust ignition proof by a recognized testing laboratory
• Less than 10 Ohms of resistivity
• HEPA Filtro - Opcional con una eficacia del 99.995 % sobre 0.3 micras. Probado: IEST RP-CC001.3. H14 por método MPPS según EN 1822. O Filtro de ULPA - Opcional con una eficacia del 99.999 % sobre 0.12 micras. Probado: IEST RP-CC001.3. Eficacia de filtración del 99.9995 % sobre 0.18 micras. Probado: IEST RP-CC001.3. U15 por método MPPS según EN 1822.
• *Cleanroom compatible·
• Designed to be attached to process machines and for general cleanup
• Can be used for the recovery of tablets in the pharmaceutical industry
• Continuous duty single or 3-phase explosion proof/dust ignition proof motor
• Available with Automatic Reverse Purge (ARP)
• Available in a fixed or mobile unit
• All stainless steel SAE 304/316 construction
• For dry recovery only (liquids can be recovered into a separate tank)
• Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 9.5 gallons (38 liters)
• Vertical mounting for areas with space constraints.  Unit has a small environmental footprint
• Equipped with 4 wheels
• Group E Motor (Metal Dust) and Switch available
• Other motor performances available

Detalles

All stainless steel SAE 304/316 construction.  Less than 10 Ohms of resistivity.   This unit is available with an optional true HEPA (H14) / ULPA (U15) Filter located downstream outside of the motor housing.  This unit is desgined to be attached to process machines and for general cleanup in hazardous locations.· This unit can also be used for the recovery of tablets in the pharmaceutical industry.  Equipped with an Automatic Reverse Purge (ARP) system.  The vacuum cleaner is mounted on 4 wheels with locks for easy manoeuverability and facilitates access to processing equipment when used as a mobile unit.   Vertical mounting for areas with space constraints.  Unit has a small environmental footprint.  All of our ULPA vacuum cleaners are Aerosol Leak Tested before leaving our facility.

Folletos y Certificados

Name	Description	Download
CD-2600 EX (ARP) Brochure (Metric)	Technical data for CD-2600 EX (ARP) in metric units (Millimeters, Kilograms...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
CD-2600 EX (ARP) Brochure (Imperial)	Technical data for CD-2600 EX (ARP) in imperial units (Inches, Pounds...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
ATEX Vacuum Cleaners electrically operated triphase to be used in Hazardous Areas	Certification Document	descargar

Información rápida

• Legally certified explosion proof/dust ignition proof by a recognized testing laboratory
• Less than 10 Ohms of resistivity
• HEPA Filtro - Opcional con una eficacia del 99.995 % sobre 0.3 micras. Probado: IEST RP-CC001.3. H14 por método MPPS según EN 1822. O Filtro de ULPA - Opcional con una eficacia del 99.999 % sobre 0.12 micras. Probado: IEST RP-CC001.3. Eficacia de filtración del 99.9995 % sobre 0.18 micras. Probado: IEST RP-CC001.3. U15 por método MPPS según EN 1822.
• *Cleanroom compatible·
• Designed to be attached to process machines and for general cleanup
• Can be used for the recovery of tablets in the pharmaceutical industry
• Continuous duty single or 3-phase explosion proof/dust ignition proof motor
• Available with Manual Reverse Purge ((MRP))
• Available in a fixed or mobile unit
• All stainless steel SAE 304/316 construction
• For dry recovery only (liquids can be recovered into a separate tank)
• Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 9.5 gallons (38 liters)
• Vertical mounting for areas with space constraints.  Unit has a small environmental footprint
• Equipped with 4 wheels
• Group E Motor (Metal Dust) and Switch available
• Other motor performances available

Detalles

All stainless steel SAE 304/316 construction.  Less than 10 Ohms of resistivity.  This unit is available with an optional true HEPA (H14) / ULPA (U15) Filter located downstream outside of the motor housing.  This unit is desgined to be attached to process machines and for general cleanup in hazardous locations.· This unit can also be used for the recovery of tablets in the pharmaceutical industry.· Equipped with a Manual Reverse Purge ((MRP)) system.  The vacuum cleaner is mounted on 4 wheels with locks for easy manoeuverability and facilitates access to processing equipment when used as a mobile unit.   Vertical mounting for areas with space constraints.  Unit has a small environmental footprint.  All of our ULPA vacuum cleaners are Aerosol Leak Tested before leaving our facility.

Folletos y Certificados

Name	Description	Download
CD-2600 EX (MRP) Brochure (Metric)	Technical data for CD-2600 EX (MRP) in metric units (Millimeters, Kilograms...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
CD-2600 EX (MRP) Brochure (Imperial)	Technical data for CD-2600 EX (MRP) in imperial units (Inches, Pounds...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
ATEX Vacuum Cleaners electrically operated triphase to be used in Hazardous Areas	Certification Document	descargar

Información rápida

• Legally certified explosion proof/dust ignition proof by a recognized testing laboratory
• Less than 10 Ohms of resistivity
• HEPA Filtro - Opcional con una eficacia del 99.995 % sobre 0.3 micras. Probado: IEST RP-CC001.3. H14 por método MPPS según EN 1822. O Filtro de ULPA - Opcional con una eficacia del 99.999 % sobre 0.12 micras. Probado: IEST RP-CC001.3. Eficacia de filtración del 99.9995 % sobre 0.18 micras. Probado: IEST RP-CC001.3. U15 por método MPPS según EN 1822.
• *Cleanroom compatible·
• Designed to be attached to process machines and for general cleanup
• Can be used for the recovery of tablets in the pharmaceutical industry
• Continuous duty single or 3-phase explosion proof/dust ignition proof motor
• Available with Manual Filter Shaker (MFS)
• Available in a fixed or mobile unit
• All stainless steel SAE 304/316 construction
• For dry recovery only (liquids can be recovered into a separate tank)
• Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 9.5 gallons (38 liters)
• Vertical mounting for areas with space constraints.  Unit has a small environmental footprint
• Equipped with 4 wheels
• Group E Motor (Metal Dust) and Switch available
• Other motor performances available

Detalles

All stainless steel SAE 304/316 construction.  Less than 10 Ohms of resistivity.   This unit is available with an optional true HEPA (H14) / ULPA (U15) Filter located downstream outside of the motor housing.  This unit is desgined to be attached to process machines and for general cleanup in hazardous locations.· This unit can also be used for the recovery of tablets in the pharmaceutical industry.· Equipped with a Manual Filter Shaker (MFS) system.  The vacuum cleaner is mounted on 4 wheels with locks for easy manoeuverability and facilitates access to processing equipment when used as a mobile unit.   Vertical mounting for areas with space constraints.  Unit has a small environmental footprint.  All of our ULPA vacuum cleaners are Aerosol Leak Tested before leaving our facility.

Folletos y Certificados

Name	Description	Download
CD-2600 EX (MFS) Brochure (Metric)	Technical data for CD-2600 EX (MFS) in metric units (Millimeters, Kilograms...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
CD-2600 EX (MFS) Brochure (Imperial)	Technical data for CD-2600 EX (MFS) in imperial units (Inches, Pounds...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
ATEX Vacuum Cleaners electrically operated triphase to be used in Hazardous Areas	Certification Document	descargar

Información rápida

Legalmente certificada por un laboratorio de pruebas debidamente autorizado. Menos de 10 ohms de resistencia. Compatible en salas blanca y puede ser utilizado en la industria farmaceutica. Pra limpieza general y Ambientes Peligrosos. Para trabajos continuos con motores monofasicos y trifasicos a prueba de ignicion de polvo y a prueba de explosiones. Disponibles con Anillo separador al medio( MRAC) con carbon activo. Todo esn Acero Inoxidable SAE 304/316. Capacidad de recuperacion de 12.5 galones (47.5 litros) Equipado con carretilla de 4 ruedas para un facil manejo.

Detalles

Todo fabricado en acero inxidable SAE304/316 Menos de 10 ohms de resistencia Tambien se puede recoger tanto liquidos como polvos Esta unidad también puede ser usada para la recuperación de pastillas en la industria farmacéutica. . Esta unidad está disponible con HEPA verdadero (H14) / ULPA (U15) el Filtro fuera del alojamiento de motor. · La aspiradora esta montada sobre 4 ruedas con cerraduras para maniobrar fácilmente y facilitar el acceso al tratamiento del equipo cuando se utiliza como una unidad móvil. · montaje Vertical para áreas con espacios reducidos . Todas nuestras aspiradoras ULPA son probadas con aerosol antes de salir de nuestras instalaciones.

Folletos y Certificados

Name	Description	Download
CD-2 EX (MRAC) Brochure (Metric)	Technical data for CD-2 EX (MRAC) in metric units (Millimeters, Kilograms...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
CD-2 EX (MRAC) Brochure (Imperial)	Technical data for CD-2 EX (MRAC) in imperial units (Inches, Pounds...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
ATEX Vacuum Cleaners electrically operated triphase to be used in Hazardous Areas	Certification Document	descargar

Información rápida

• Legally certified explosion proof/dust ignition proof by a recognized testing laboratory
• Less than 10 Ohms of resistivity
• Fltro HEPA - Incluido con una eficacia de 99.995% sobre 0.3 micras comprobado. IEST RP-CC001.3.H14 por MPPS segun el metodo EN 1822
• *Cleanroom compatible.  Can be used in the pharmaceutical industry
• For general cleanup in hazardous locations
• Continuous duty 3-phase explosion proof/dust ignition proof motor
• Wet and dry recovery
• Available with Middle Ring with Activated Carbon (MRAC).  Several types of carbon are available
• Available with Liquid Bath Immersion system for the recovery of metallic/combustible dusts
• All stainless steel SAE 304/316 construction
• Liquid recovery capacity of 17 gallons (65 liters)
• Equipped with a 4-wheel cart for easy maneuverability
• Group E Motor (Metal Dust) and Switch available
• Other motor performances available

Detalles

All stainless steel SAE  304/316 construction.  Less than 10 Ohms of resistivity.  This unit contains a true HEPA Filter (H14) located downstream outside of the motor housing.  This unit is cleanroom compatible and can be used for the pharmaceutical industry.  This unit can be used for general maintenance in hazardous locations.  This unit is also available with a Middle Ring with Activated Carbon (MRAC) for wet and dry recovery as well as a version with a Liquid Bath Immersion system for the recovery of metallic/combustible dusts.  An Activated Carbon Cartridge is also available for the adsorption of toxic fumes and vapors.  Several different types of carbon are available.  All of our ULPA vacuum cleaners are Aerosol Leak Tested before leaving our facility.

Folletos y Certificados

Name	Description	Download
CD-3 EX Series (Wet & Dry) Brochure (Metric)	Technical data for CD-3 EX Series (Wet & Dry) in metric units (Millimeters, Kilograms...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
CD-3 EX Series (Wet & Dry) Brochure (Imperial)	Technical data for CD-3 EX Series (Wet & Dry) in imperial units (Inches, Pounds...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
ATEX Vacuum Cleaners electrically operated triphase to be used in Hazardous Areas	Certification Document	descargar

Información rápida

Certificado legalmente por un laboratorio de pruebas autorizado. Menos de 10ohms de resistencia. Filtro pricipal con disipacion estatica PTFE en forma de campana. Diseñado para limpieza general. Motor monofasico a prueba de explosiones e ignicion de polvo,para trabajo continuo. Equipado con sacudidor manual de filtro. Para recuperacion seca solamente. Hecho en acero inoxidable (a excepcion de l carretiila que lo sostiene). Con tanque desmontable (DT) para mejor manipulacion de los materiales. Capacidad de recuperacion de 10 galones (38 litros). Juego de accesorios con disipacion estatica incluidos.

Detalles

Todo en acero inoxidable 304 (excepto carro). Menos de 10 Ohm de resistencia. Esta unidad está disponible con un opcional HEPA corriente arriba verdadero (H14) el Filtro con el alojamiento. Esta unidad esta equipada con un filtro principal PTFE con disipacion estatica en forma de campana y un sacudidos manual de filtro (MFS) . Esta unidad no tiene correa al lado del soplador por lo tanto no necesita mantenimiento con una vida útil de una 25000 horas. El motor de prueba de ignición de polvo explosivo.E l motor esta totalmente protegido dentro de un gabinete. Esta unidad puede ser usada para el mantenimiento general en posiciones(ubicaciones) peligrosas. Equipado con una bolsa disponible con filtro para la disposición fácil y salva(segura) de materiales recuperados. Todas nuestras aspiradoras HEPA son el Escape de Aerosol Probado antes de la salida de nuestra facilidad

Folletos y Certificados

Name	Description	Download
CD-230V EX DT (MFS) Brochure (Metric)	Technical data for CD-230V EX DT (MFS) in metric units (Millimeters, Kilograms...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
CD-230V EX DT (MFS) Brochure (Imperial)	Technical data for CD-230V EX DT (MFS) in imperial units (Inches, Pounds...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)

Información rápida

• Legally certified explosion proof/dust ignition proof by a recognized testing laboratory
• Less than 10 Ohms of resistivity
• HEPA Filtro - Opcional con una eficacia del 99.995 % sobre 0.3 micras. Probado: IEST RP-CC001.3. H14 por método MPPS según EN 1822
• Static dissipating PTFE bell shapped Main Filter
• Designed for general cleanup
• Continuous duty 3-phase explosion proof/dust ignition proof motor
• Equipped with a Manual Filter Shaker (MFS) system
• For dry recovery only
• All stainless steel SAE  304 construction (except cart)
• Detachable recovery tank (DT) for easy disposal of recovered materials.  Recovery capacity of 17 gallons (64 liters).  26 gallons (100 liters) recovery capacity available.
• Includes a complete static dissipative tool kit

Detalles

All stainless steel SAE  304 construction (except cart).  Less than 10 Ohms of resistivity.  This unit is available with an optional true HEPA (H14) Filter.  This unit is equipped with a static dissipating bell shapped PTFE filter and Manual Filter Shaker (MFS) system.  This unit is also equipped with a maintenance free, beltless side chanel blower with a 25000 hour lifespan.  The 3-phase explosion proof/dust ignition proof motor is fully enclosed in a protective cabinet.  This unit can be used for general maintenance in hazardous locations.  Equipped with a disposable filter bag for the easy and safe disposal of recovered materials.  All of our HEPA vacuum cleaners are Aerosol Leak Tested before leaving our facility.

Folletos y Certificados

Name	Description	Download
CD-4000 EX (MFS) Brochure (Metric)	Technical data for CD-4000 EX (MFS) in metric units (Millimeters, Kilograms...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
CD-4000 EX (MFS) Brochure (Imperial)	Technical data for CD-4000 EX (MFS) in imperial units (Inches, Pounds...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
ATEX Vacuum Cleaners electrically operated triphase to be used in Hazardous Areas	Certification Document	descargar
CD-4000 EX Brochure	Model Brochure	descargar

Información rápida

• Legally certified explosion proof/dust ignition proof recognized testing laboratory
• Less than 10 Ohms of resistivity
• HEPA Filtro - Opcional con una eficacia del 99.995 % sobre 0.3 micras. Probado: IEST RP-CC001.3. H14 por método MPPS según EN 1822. O Filtro de ULPA - Opcional con una eficacia del 99.999 % sobre 0.12 micras. Probado: IEST RP-CC001.3. Eficacia de filtración del 99.9995 % sobre 0.18 micras. Probado: IEST RP-CC001.3. U15 por método MPPS según EN 1822.
• *Cleanroom compatible.  Can be used in the pharmaceutical industry
• Continuous duty 3-phase explosion proof/dust ignition proof High Performance 2-Stage In Series Motor/Blower.  Also available with 1-Stage regular performance Motor/Blowers
• Available with a Manual Filter Shaker (MFS) system
• Total surface area of SD* Main Filter is: 14 ft² (13 000 cm²)
• All Stainless Steel SAE 304 construction
• For dry recovery (liquids can be recovered into a separate tank)
• Detachable recovery tank (DT) for easy disposal of recovered materials
• Declaration of conformity
• Group E Motor (Metal Dust) and Switch available
• Other motor performances available

Detalles

All stainless steel SAE 304 construction.  Equipped with a continuous duty 3-phase explosion proof/dust ignition proof motor.  Less than 10 Ohms of resistivity.  These units can also be equipped with true HEPA Filters (H14)/ULPA Filters (U15) located upstream and/or downstream of the motor.  This unit can be used for general maintenance in hazardous locations and is designed to be either a portable or stationary unit.  This unit is cleanroom compatible and can be used in the pharmaceutical industry.  This unit IS equipped with a Manual Filter Shaker (MFS) system.  These filtration systems enable the operator to clean the internal filters without having to open up the vacuum cleaner.  These filtration systems reduce maintenance downtime.  All of our HEPA/ULPA vacuum cleaners are Aerosol Leak Tested before leaving our facility.

Folletos y Certificados

Name	Description	Download
CD-5 EX (MFS) Brochure (Metric)	Technical data for CD-5 EX (MFS) in metric units (Millimeters, Kilograms...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
CD-5 EX (MFS) Brochure (Imperial)	Technical data for CD-5 EX (MFS) in imperial units (Inches, Pounds...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
ATEX Vacuum Cleaners electrically operated triphase to be used in Hazardous Areas	Certification Document	descargar

Información rápida

• Legally certified explosion proof/dust ignition proof by a recognized testing laboratory
• Less than 10 Ohms of resistivity
• HEPA Filtro - Opcional con una eficacia del 99.995 % sobre 0.3 micras. Probado: IEST RP-CC001.3. H14 por método MPPS según EN 1822. O Filtro de ULPA - Opcional con una eficacia del 99.999 % sobre 0.12 micras. Probado: IEST RP-CC001.3. Eficacia de filtración del 99.9995 % sobre 0.18 micras. Probado: IEST RP-CC001.3. U15 por método MPPS según EN 1822.
• *Cleanroom compatible.  Can be used in the pharmaceutical industry
• Continuous duty 3-phase explosion proof/dust ignition proof motor
• Manual or automatic filtration cleaning systems
• All Stainless Steel SAE 304 construction
• For dry recovery (liquids can be recovered into a separate tank)
• Detachable recovery tank (DT) for easy disposal of recovered materials
• Declaration of conformity
• Group E Motor (Metal Dust) and Switch available
• Other motor performances available

Detalles

All stainless steel SAE 304 construction.  Equipped with a continuous duty 3-phase explosion proof/dust ignition proof motor.  Less than 10 Ohms of resistivity.  These units can also be equipped with true HEPA Filters (H14)/ULPA Filters (U15) located upstream and/or downstream of the motor.  This unit can be used for general maintenance in hazardous locations and is designed to be either a portable or stationary unit.  This unit is cleanroom compatible and can be used in the pharmaceutical industry.  This unit can be equipped with one of 3 filtration systems - Manual Filters Shaker (MFS), Manual Reverse Purge ((MRP)), Automatic Reverse Purge System (ARP).  These filtration systems enable the operator to clean the internal filters/cartridges without having to open up the vacuum cleaner.  These filtration systems reduce maintenance downtime.  All of our HEPA vacuum cleaners are Aerosol Leak Tested before leaving our facility.

Folletos y Certificados

Name	Description	Download
CD-7 EX Extended SERIES Brochure (Metric)	Technical data for CD-7 EX Extended SERIES in metric units (Millimeters, Kilograms...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
CD-7 EX Extended SERIES Brochure (Imperial)	Technical data for CD-7 EX Extended SERIES in imperial units (Inches, Pounds...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
ATEX Vacuum Cleaners electrically operated triphase to be used in Hazardous Areas	Certification Document	descargar

Información rápida

· A prueba de ignición de polvo de explosivo. .Certificada por un laboratorio de prueba autorizado. ·Menos de 10 Ohm de resistencia · HEPA Filtro - Opcional con una eficacia del 99.995 % sobre 0.3 micras. Probado: IEST RP-CC001.3. H14 por método MPPS según EN 1822. O Filtro de ULPA - Opcional con una eficacia del 99.999 % sobre 0.12 micras. Probado: IEST RP-CC001.3. Eficacia de filtración del 99.9995 % sobre 0.18 micras. Probado: IEST RP-CC001.3. U15 por método MPPS según EN 1822. · *compatible para salas blancas. Puede ser usado en la industria farmacéutica ·Con motor continuo a prueba de ignición de polvo explosivo de 3 fases ·SistemA completo de limpieza de filtración automáticos ·Total la superficie de Revés de SD* Purgan el Cartucho y la Falda es: 209.76 pies ² (19.5 m ²) para modelos de APS ·All Acero inoxidable SAE 304 construcción ·For la recuperación seca (líquidos puede ser recuperado en un tanque separado) ·Detachable tanque de recuperación (DT) para disposición fácil de materiales recuperados ·Declaration de conformidad

Detalles

Todo en acero inoxidable SAE 304 . Equipado con un motor a prueba de ignición de polvo explosivo de 3 fases. Menos de 10 Ohm de resistencia. Estas unidades también pueden ser equipadas con Filtros de HEPA verdaderos (H14)/ULPA Filtros (U15) localizado a la entrada o a la salida del motor. Esta unidad puede ser usada para el mantenimiento general en posiciones(ubicaciones) peligrosas y es diseñada para ser unidad fija o móvil. Esta unidad es compatible en salas blancas y puede ser usada en la industria farmacéutica. Esta equipada con un Sistema de Purga Automático (APS). Este sistema de filtración permite al operador limpiar los filtros/cartuchos interno sin necesidad abrir la aspiradora. Estos sistemas de filtración reducen el tiempo de inactividad de mantenimiento. Todas nuestras aspiradoras HEPA son probadas con aerosol antes de salir de nuestras instalaciones.

Folletos y Certificados

Name	Description	Download
CD-10 EX SERIES Brochure (Metric)	Technical data for CD-10 EX SERIES in metric units (Millimeters, Kilograms...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
CD-10 EX SERIES Brochure (Imperial)	Technical data for CD-10 EX SERIES in imperial units (Inches, Pounds...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
ATEX Vacuum Cleaners electrically operated triphase to be used in Hazardous Areas	Certification Document	descargar

Información rápida

• Legally certified explosion proof/dust ignition proof by a recognized testing laboratory. 
• Less than 10 Ohms of resistivity
• *Cleanroom compatible.  Can be used in the pharmaceutical industry
• Continuous duty 3-phase explosion proof motor
• Power Unit can be attached to a Filtration System (FRS)
• Can be used as a mobile or central unit
• All stainless steel SAE construction
• Equipped with 4 wheels for easy maneuverability.  Can also be equipped with slots for fork lift capability
• Group E Motor (Metal Dust) and Switch available
• Other motor performances available

Detalles

All stainless steel SAE construction.  Less than 10 Ohms of resistivity.  This unit can be equipped with a true ULPA Filter (U15) or HEPA Filter (H14) located either downstream or upstream outside of the motor housing.  This unit is cleanroom compatible and can be used in the pharmaceutical industry.  This unit can be used in hazardous locations and can be used as either a mobile or central unit.  It can also be hooked up to a Filtration System (FRS).  All of our ULPA/HEPA Power Units are Aerosol Leak Tested before leaving our facility.

Folletos y Certificados

Name	Description	Download
CDPU-5/7/10 EX Brochure (Metric)	Technical data for CDPU-5/7/10 EX in metric units (Millimeters, Kilograms...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
CDPU-5/7/10 EX Brochure (Imperial)	Technical data for CDPU-5/7/10 EX in imperial units (Inches, Pounds...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
ATEX Vacuum Cleaners electrically operated triphase to be used in Hazardous Areas	Certification Document	descargar

Información rápida

• Fltro HEPA - Incluido con una eficacia de 99.995% sobre 0.3 micras comprobado. IEST RP-CC001.3.H14 por MPPS segun el metodo EN 1822
• *Cleanroom compatible.  Can be used in the pharmaceutical industry
• Pneumatically (air) operated
• For dry recovery only
• All stainless steel SAE 304 construction
• Handheld with shoulder straps
• Recovery capacity of 0.5 gallon (2 liters) in optional Disposable Filter Bag
• Available with an optional Carrying Case
• Equipped with a complete static dissipating tool kit, including suction and air line hoses
• The air jet is user adjustable from 80" to 190" of static waterlift.  For ideal performance Tiger-Vac has set up this vacuum at 80" of waterlift, 50 CFM at 1.5" suction intake

Detalles

All stainless steel SAE 304 construction.  This unit is equipped with a true HEPA (H14) Filter.  This unit is cleanroom compatible and can be used in the pharmaceutical industry.  This vacuum cleaner has been designed for general maintenance in hazardous locations.  Lightweight and ergonomic, this unit is ideal for use in areas where a larger vacuum cleaner would be cumbersome.  The air jet is user adjustable from 80" to 190" of static waterlift.  For ideal performance Tiger-Vac has set up this vacuum at 80" of waterlift, 50 CFM at 1.5" suction intake.  All of our HEPA vacuum cleaners are Aerosol Leak Tested before leaving our facility.

Folletos y Certificados

Name	Description	Download
SSAT-2L (HH) AIR TIGER Brochure (Metric)	Technical data for SSAT-2L (HH) AIR TIGER in metric units (Millimeters, Kilograms...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
SSAT-2L (HH) AIR TIGER Brochure (Imperial)	Technical data for SSAT-2L (HH) AIR TIGER in imperial units (Inches, Pounds...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)

Información rápida

• Fltro HEPA - Incluido con una eficacia de 99.995% sobre 0.3 micras comprobado. IEST RP-CC001.3.H14 por MPPS segun el metodo EN 1822
• *Cleanroom compatible.  Can be used in the pharmaceutical industry
• Pneumatically (air) operated
• For dry recovery only
• All stainless steel SAE 304 construction
• Lighweight and equipped with a backpack harness
• Recovery capacity of 1.5 gallons (6 liters) in optional Disposable Filter Bag
• Available with an optional Carrying Case
• Equipped with a complete static dissipating tool kit, including suction and air line hoses
• The air jet is user adjustable from 80" to 190" of static waterlift.  For ideal performance Tiger-Vac has set up this vacuum at 80" of waterlift, 50 CFM at 1.5" suction intake

Detalles

All stainless steel SAE 304 construction.  This unit is equipped with a true HEPA (H14) Filter.  This unit is cleanroom compatible and can be used in the pharmaceutical industry.  This vacuum cleaner has been designed for general maintenance in hazardous locations.  Lightweight and ergonomic, this unit is ideal for use in areas where a larger vacuum cleaner would be cumbersome.  The air jet is user adjustable from 80" to 190" of static waterlift.  For ideal performance Tiger-Vac has set up this vacuum at 80" of waterlift, 50 CFM at 1.5" suction intake.  All of our HEPA vacuum cleaners are Aerosol Leak Tested before leaving our facility.

Folletos y Certificados

Name	Description	Download
SSAT-6L (BP) AIR TIGER Brochure (Metric)	Technical data for SSAT-6L (BP) AIR TIGER in metric units (Millimeters, Kilograms...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
SSAT-6L (BP) AIR TIGER Brochure (Imperial)	Technical data for SSAT-6L (BP) AIR TIGER in imperial units (Inches, Pounds...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)

Información rápida

• Legally certified explosion proof/dust ignition proof by a recognized testing laboratory
• Less than 10 Ohms of resistivity
• HEPA Filtro - Incluido con una eficacia del 99.995 % sobre 0.3 micras. Probado: IEST RP-CC001.3. H14 por método MPPS según EN 1822. O Filtro de ULPA - Opcional con una eficacia del 99.999 % sobre 0.12 micras. Probado: IEST RP-CC001.3. Eficacia de filtración del 99.9995 % sobre 0.18 micras. Probado: IEST RP-CC001.3. U15 por método MPPS según EN 1822.
• *Cleanroom compatible.  Can be used in the pharmaceutical industry
• For general cleanup in hazardous locations
• Pneumatically (air) operated
• For wet and dry recovery
• All stainless steel SAE 304 construction (except cart).  Stainless steel cart available
• Recovery tank capacity of 10 - 55 gallons (38 - 209 liters)
• Optional SD* polyliner and clip available for easy and safe disposal of recovered materials
• Based on an SD* 4-wheel dolly or on an SD* 4-wheel tilting cart to allow for easy emptying of recovered materials
• Complete static dissipating tool kit and suction hose included

SD*  Static Dissipative

Detalles

All stainless steel SAE 304 construction (except cart).  Less than 10 Ohms of resistivity.  These units are equipped with a true HEPA Filter (H14) located downstream.  These are wet & dry vacuum cleaners.  Recovery capacity of between 10 to 55 gallons (38 to 209 liters).  All of our HEPA vacuum cleaners are Aerosol Leak Tested before leaving our facility.

Folletos y Certificados

Name	Description	Download
SS-10 TO 55 RE SERIES Brochure (Metric)	Technical data for SS-10 TO 55 RE SERIES in metric units (Millimeters, Kilograms...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
SS-10 TO 55 RE SERIES Brochure (Imperial)	Technical data for SS-10 TO 55 RE SERIES in imperial units (Inches, Pounds...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
ATEX Self certified pneumatically (air) operated	Certification Document	descargar

Información rápida

• Legally certified explosion proof/dust ignition proof by a recognized testing laboratory
• Less than 10 Ohms of resistivity
• Fltro HEPA - Incluido con una eficacia de 99.995% sobre 0.3 micras comprobado. IEST RP-CC001.3.H14 por MPPS segun el metodo EN 1822
• *Cleanroom compatible.  Can be used in the pharmaceutical industry
• For general cleanup in hazardous locations
• Pneumatically (air) operated
• For dry recovery only.  Optional floater system available for liquid recovery
• All stainless steel SAE 304 construction
• Recovery capacity of 10.5 gallons (40 liters)
• Optional poly liner and clip available for the easy and safe disposal of recovered materials
• Equipped with a 4-wheel dolly
• Complete static dissipating tool kit and suction hose included

Detalles

All stainless steel SAE 304 construction.  Less than 10 Ohms of resistivity.  This unit is equipped with a true HEPA (H14) Filter located downstream.  this unit is cleanroom compatible and can be used in the pharmaceutical industry.  This unit can be used for general cleanup in hazardous locations.  This is a dry recovery only vacuum cleaner. An optional Floater system can be installed for liquid recovery.  All of our HEPA vacuum cleaner are Aerosol Leak Tested before leaving our facility

Folletos y Certificados

Name	Description	Download
SS-40L RE HEPA (MR) Brochure (Metric)	Technical data for SS-40L RE HEPA (MR) in metric units (Millimeters, Kilograms...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
SS-40L RE HEPA (MR) Brochure (Imperial)	Technical data for SS-40L RE HEPA (MR) in imperial units (Inches, Pounds...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
ATEX Self certified pneumatically (air) operated	Certification Document	descargar

Información rápida

• Legally certified explosion proof/dust ignition proof by a recognized testing laboratory
• Less than 10 Ohms of resistivity
• Fltro HEPA - Incluido con una eficacia de 99.995% sobre 0.3 micras comprobado. IEST RP-CC001.3.H14 por MPPS segun el metodo EN 1822
• *Cleanroom compatible.  Can be used in the pharmaceutical industry with optional stainless steel cart
• Designed for applications where finely pulverized dust is to be recovered
• Pneumatically (air) operated
• Available with Manual Filter Shaker (MFS) system
• For dry recovery only
• All stainless steel SAE 304 construction (except cart).  Stainless steel cart available
• Detachable recovery tank (DT).  Recovery capacity of 6.25 gallons (25 liters)
• Equipped with an SD* polyliner and clip for easy and safe disposal of recovered materials
• Equipped with an SD* 4-wheel cart and tool basket
• Complete static dissipating tool kit and suction hose included

SD*  Static Dissipative

Detalles

All stainless steel SAE 304 construction (except cart).  Less than 10 Ohms of resistivity.  This unit is equipped with a true HEPA (H14) Filter located downstream.  This unit is cleanroom compatible and can be used in the pharmaceutical industry when equipped with an optional stainless steel cart.  This unit has been designed for applications where finely pulverized dust is to be recovered.  This dry only unit contains a Manual Filter Shaker (MFS) system.  All of our HEPA vacuum cleaners are Aerosol Leak Tested before leaving our facility.

Folletos y Certificados

Name	Description	Download
SS-20L EX (MFS) RE HEPA SINGLE VENTURI Brochure (Metric)	Technical data for SS-20L EX (MFS) RE HEPA SINGLE VENTURI in metric units (Millimeters, Kilograms...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
SS-20L EX (MFS) RE HEPA SINGLE VENTURI Brochure (Imperial)	Technical data for SS-20L EX (MFS) RE HEPA SINGLE VENTURI in imperial units (Inches, Pounds...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
ATEX Self certified pneumatically (air) operated	Certification Document	descargar

Información rápida

• Legally certified explosion proof/dust ignition proof by a recognized testing laboratory
• Less than 10 Ohms of resistivity
• Fltro HEPA - Incluido con una eficacia de 99.995% sobre 0.3 micras comprobado. IEST RP-CC001.3.H14 por MPPS segun el metodo EN 1822
• *Cleanroom compatible.  Can be used in the pharmaceutical industry with optional stainless steel cart
• Designed for applications where finely pulverized dust is to be recovered
• Pneumatically (air) operated
• Available with Manual Filter Shaker (MFS) system
• For dry recovery only
• All stainless steel SAE 304 construction (except cart).  Stainless steel cart available
• Detachable recovery tank (DT).  Recovery capacity of 8.75 gallons (35 liters)
• Equipped with an SD* polyliner and clip for easy and safe disposal of recovered materials
• Equipped with an SD* 4-wheel cart and tool basket
• Complete static dissipating tool kit and suction hose included

SD*  Static Dissipative

Detalles

All stainless steel SAE 304 construction (except cart).  Less than 10 Ohms of resistivity.  This unit is equipped with a true HEPA (H14) Filter located downstream.  This unit is cleanroom compatible and can be used in the pharmaceutical industry when equipped with an optional stainless steel cart.  This unit has been designed for applications where finely pulverized dust is to be recovered.  This dry only unit contains a Manual Filter Shaker (MFS) system.  All of our HEPA vacuum cleaners are Aerosol Leak Tested before leaving our facility.

Folletos y Certificados

Name	Description	Download
SS-35L EX (MFS) RE HEPA SINGLE VENTURI Brochure (Metric)	Technical data for SS-35L EX (MFS) RE HEPA SINGLE VENTURI in metric units (Millimeters, Kilograms...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
SS-35L EX (MFS) RE HEPA SINGLE VENTURI Brochure (Imperial)	Technical data for SS-35L EX (MFS) RE HEPA SINGLE VENTURI in imperial units (Inches, Pounds...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
ATEX Self certified pneumatically (air) operated	Certification Document	descargar

Información rápida

• Legally certified explosion proof/dust ignition proof by a recognized testing laboratory
• Less than 10 Ohms of resistivity
• Fltro HEPA - Incluido con una eficacia de 99.995% sobre 0.3 micras comprobado. IEST RP-CC001.3.H14 por MPPS segun el metodo EN 1822
• *Cleanroom compatible.  Can be used in the pharmaceutical industry with optional stainless steel cart
• Designed for applications where finely pulverized dust is to be recovered
• Pneumatically (air) operated
• Available with Manual Reverse Purge ((MRP)) system
• For dry recovery only
• All stainless steel SAE 304 construction (except cart).  Stainless steel cart available
• Detachable recovery tank (DT).  Recovery capacity of 8.75 gallons (35 liters)
• Equipped with an SD* polyliner and clip for easy and safe disposal of recovered materials
• Equipped with an SD* 4-wheel cart and tool basket
• Complete static dissipating tool kit and suction hose included

SD*  Static Dissipative

Detalles

All stainless steel SAE 304 construction (except cart).  Less than 10 Ohms of resistivity.  This unit is equipped with a true HEPA (H14) Filter located downstream.  This unit is cleanroom compatible and can be used in the pharmaceutical industry when equipped with an optional stainless steel cart.  This unit has been designed for applications where finely pulverized dust is to be recovered.  This dry only unit contains a Manual Reverse Purge ((MRP)) system.  All of our HEPA vacuum cleaners are Aerosol Leak Tested before leaving our facility.

Folletos y Certificados

Name	Description	Download
SS-35L EX (MRP) RE HEPA SINGLE VENTURI Brochure (Metric)	Technical data for SS-35L EX (MRP) RE HEPA SINGLE VENTURI in metric units (Millimeters, Kilograms...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
SS-35L EX (MRP) RE HEPA SINGLE VENTURI Brochure (Imperial)	Technical data for SS-35L EX (MRP) RE HEPA SINGLE VENTURI in imperial units (Inches, Pounds...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
ATEX Self certified pneumatically (air) operated	Certification Document	descargar

Información rápida

• Legally certified explosion proof/dust ignition proof by a recognized testing laboratory
• Less than 10 Ohms of resistivity
• Fltro HEPA - Incluido con una eficacia de 99.995% sobre 0.3 micras comprobado. IEST RP-CC001.3.H14 por MPPS segun el metodo EN 1822
• *Cleanroom compatible.  Can be used in the pharmaceutical industry with optional stainless steel cart
• Designed for applications where finely pulverized dust is to be recovered
• Pneumatically (air) operated
• Available with Manual Filter Shaker (MFS) system
• For dry recovery only
• All stainless steel SAE 304 construction (except cart).  Stainless steel cart available
• Detachable recovery tank (DT).  Recovery capacity of 15.8 gallons (63 liters)
• Equipped with an SD* polyliner and clip for easy and safe disposal of recovered materials
• Equipped with an SD* 4-wheel cart for easy maneuverability
• Complete static dissipating tool kit and suction hose included

SD*  Static Dissipative

Detalles

All stainless steel SAE 304 construction (except cart).  Less than 10 Ohms of resistivity.  This unit is equipped with a true HEPA (H14) Filter located downstream.  This unit is cleanroom compatible and can be used in the pharmaceutical industry when equipped with an optional stainless steel cart.  This unit has been designed for applications where finely pulverized dust is to be recovered.  This dry only unit contains a Manual Filter Shaker (MFS) system.  All of our HEPA vacuum cleaners are Aerosol Leak Tested before leaving our facility.

Folletos y Certificados

Name	Description	Download
SS-63L EX (MFS) RE HEPA SINGLE/TWIN VENTURI Brochure (Metric)	Technical data for SS-63L EX (MFS) RE HEPA SINGLE/TWIN VENTURI in metric units (Millimeters, Kilograms...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
SS-63L EX (MFS) RE HEPA SINGLE/TWIN VENTURI Brochure (Imperial)	Technical data for SS-63L EX (MFS) RE HEPA SINGLE/TWIN VENTURI in imperial units (Inches, Pounds...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
ATEX Self certified pneumatically (air) operated	Certification Document	descargar

Información rápida

• Legally certified explosion proof/dust ignition proof by a recognized testing laboratory
• Less than 10 Ohms of resistivity
• Fltro HEPA - Incluido con una eficacia de 99.995% sobre 0.3 micras comprobado. IEST RP-CC001.3.H14 por MPPS segun el metodo EN 1822
• *Cleanroom compatible.  Can be used in the pharmaceutical industry with optional stainless steel cart
• Designed for applications where finely pulverized dust is to be recovered
• Pneumatically (air) operated
• Available with Manual Reverse Purge ((MRP)) system
• For dry recovery only
• All stainless steel SAE 304 construction (except cart).  Stainless steel cart available
• Detachable recovery tank (DT).  Recovery capacity of 15.8 gallons (63 liters)
• Equipped with an SD* polyliner and clip for easy and safe disposal of recovered materials
• Equipped with an SD* 4-wheel cart for easy manoeuverability
• Complete static dissipating tool kit and suction hose included

SD*  Static Dissipative

Detalles

All stainless steel SAE 304 construction (except cart).  Less than 10 Ohms of resistivity.  This unit is equipped with a true HEPA (H14) Filter located downstream.  This unit is cleanroom compatible and can be used in the pharmaceutical indystry when equipped with an optional stainless steel cart.  This unit has been designed for applications where finely pulverized dust is to be recovered.  This dry only unit contains a Manual Reverse Purge ((MRP)) system.  All of our HEPA vacuum cleaners are Aerosol Leak Tested before leaving our faciility.

Folletos y Certificados

Name	Description	Download
SS-63L EX (MRP) RE HEPA SINGLE/TWIN VENTURI Brochure (Metric)	Technical data for SS-63L EX (MRP) RE HEPA SINGLE/TWIN VENTURI in metric units (Millimeters, Kilograms...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
SS-63L EX (MRP) RE HEPA SINGLE/TWIN VENTURI Brochure (Imperial)	Technical data for SS-63L EX (MRP) RE HEPA SINGLE/TWIN VENTURI in imperial units (Inches, Pounds...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
ATEX Self certified pneumatically (air) operated	Certification Document	descargar

Información rápida

• Legally certified explosion proof/dust ignition proof vacuum cleaner
• Less than 10 Ohms of resistivity
• HEPA Filtro - Incluido con una eficacia del 99.995 % sobre 0.3 micras. Probado: IEST RP-CC001.3. H14 por método MPPS según EN 1822. O Filtro de ULPA - Opcional con una eficacia del 99.999 % sobre 0.12 micras. Probado: IEST RP-CC001.3. Eficacia de filtración del 99.9995 % sobre 0.18 micras. Probado: IEST RP-CC001.3. U15 por método MPPS según EN 1822.
• *Cleanroom compatible.  Can be used in the pharmaceutical industry with optional stainless steel cart
• Pneumatically (air) operated
• Manual or Fully automatic filtration cleaning systems
• All Stainless Steel SAE 304 construction. (except cart).  Optional stainless steel cart available
• For dry recovery (liquids can be recovered into a separate tank)
• Detachable recovery tank (DT) fior easy disposal of recovered materials.  Recovery capacity of 40 gallons (152 liters)

Detalles

All stainless steel SAE 304 construction (except cart).  Less than 10 Ohms of resistivity.  These units can also be equipped with true HEPA Filters (H14)/ULPA Filters (U15) located upstream and/or downstream.  This unit can be used for general maintenance in hazardous locations.  This unit is cleanroom compatible and can be used in the pharmaceutical industry when equipped with an optional stainless steel cart.  This unit can be equipped with one of 4 filtration systems - Manual Filter Shaker (MFS), Manual Reverse Purge ((MRP)), Automatic Reverse Purge (ARP) or Automatic Purge System (APS).  These filtration systems enable the operator to clean the internal filters/cartridges without having to open up the vacuum cleaner.  These filtration systems reduce maintenance downtime.  All of our HEPA vacuum cleaners are Aerosol Leak Tested before leaving our facility.

Folletos y Certificados

Name	Description	Download
SS-40/160L EX RE HEPA TWIN VENTURI SERIES Brochure (Metric)	Technical data for SS-40/160L EX RE HEPA TWIN VENTURI SERIES in metric units (Millimeters, Kilograms...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
SS-40/160L EX RE HEPA TWIN VENTURI SERIES Brochure (Imperial)	Technical data for SS-40/160L EX RE HEPA TWIN VENTURI SERIES in imperial units (Inches, Pounds...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
ATEX Self certified pneumatically (air) operated	Certification Document	descargar

Información rápida

• Designed for the recovery and neutralization of conductive and explosive dust into a liquid immersion bath
• Less than 10 Ohms of resistivity
• *Cleanroom compatible.  Can be used in the pharmaceutical industry
• All stainless steel SAE 304
• Recovery capacity of 1 gallon (4 liters) of dust into 5 gallons (20 liters) of neutralizing liquid
• Drain valve for easy disposal of recovered materials
• Based on a 4-Wheel dolly
• Coalescing Filter Element (CFE) for moisture removal - optional
• Strainer Basket for mud recovery - optional
• Includes a Kanaflex Connection Hose, SD*
• Accessories available

Detalles

All stainless steel SAE 304 construction.  Less than 10 Ohms of resistivity.  This unit is cleanroom compatible and can be used in the pharmaceutical industry.  Designed for the recovery and neutralization of conductive and explosive dust into a liquid immersion bath.  The Immersion Separator is equipped with a splash guard system with cone and baffles to direct the dust into the neutralizing liquid.  Flammable dusts and neutralizing agents are easily disposed of through the drain valve.  The Immersion Separator must be attached to an explosion proof vacuum cleaner system.

Folletos y Certificados

Name	Description	Download
IT-25 (4W) EX Brochure (Metric)	Technical data for IT-25 (4W) EX in metric units (Millimeters, Kilograms...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
IT-25 (4W) EX Brochure (Imperial)	Technical data for IT-25 (4W) EX in imperial units (Inches, Pounds...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)

Información rápida

• Less than 10 Ohms of resistivity
• *Cleanroom compatible.  Can be used in the pharmaceutical industry
• Designed for the recovery and neutralization of conductive and explosive dust into a liquid immersion bath
• All stainless steel SAE 304
• Recovery capacity of 5 gallon (19 liters) of dust into 25 gallons (95 liters) of neutralizing liquid
• Drain valve for easy disposal of recovered materials
• Based on a 4-Wheel dolly
• Includes a static dissipating connection hose

Detalles

All stainless steel AISI SAE construction.  Less than 10 Ohms of resistivity.  This unit is cleanroom compatible and can be used in the pharmaceutical industry.  Designed for the recovery and neutralization of conductive and explosive dust into a liquid immersion bath.  The Immersion Separator is equipped with a splash guard system with cone and baffles to direct the dust into the neutralizing liquid.  Flammable dusts and neutralizing agents are easily disposed of through the drain valve.  The Immersion Separator must be attached to an explosion proof vacuum cleaner system.

Folletos y Certificados

Name	Description	Download
IT-55 (4W) EX Brochure (Metric)	Technical data for IT-55 (4W) EX in metric units (Millimeters, Kilograms...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
IT-55 (4W) EX Brochure (Imperial)	Technical data for IT-55 (4W) EX in imperial units (Inches, Pounds...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)

Información rápida

• Less than 10 Ohms of resistivity
• *Cleanroom compatible.  Can be used in the pharmaceutical industry
• Designed for the recovery of flammable liquids
• For wet & dry recovery
• All stainless steel SAE 304
• Recovery capacity of 45 gallons (171 liters)
• Drain valve for easy disposal of recovered materials
• Based on a 4-Wheel dolly
• Includes a static dissipating suction hose assembly and connection hose assembly

Detalles

All stainless steel SAE 304 construction.  Less than 10 Ohms of resistivity.  This unit is cleanroom compatible and can be used in the pharmaceutical industry.  Designed for the recovery of flammable liquids.  Recovered materials are easily dispoed of through the drain valve.  The Interceptor Drum Unit must be attached to an explosion proof vacuum cleaner system.

Folletos y Certificados

Name	Description	Download
INT-55 (4W) EX Brochure (Metric)	Technical data for INT-55 (4W) EX in metric units (Millimeters, Kilograms...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
INT-55 (4W) EX Brochure (Imperial)	Technical data for INT-55 (4W) EX in imperial units (Inches, Pounds...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)

Información rápida

• Less than 10 Ohms of resistivity
• *Cleanroom compatible.  Can be used in the pharmaceutical industry
• Designed for the recovery of flammable liquids
• For wet & dry recovery
• All stainless steel SAE 304
• Contains a Middle Ring with Activated Carbon for the adsorption of toxic/nuisance fumes & vapors
• Recovery capacity of 45 gallons (171 liters)
• Drain valve for easy disposal of recovered materials
• Based on a 4-wheel tilting cart (TC) to allow for easy emptying of recovered materials
• Includes a static dissipating suction hose assembly and connection hose assembly

Detalles

All stainless steel SAE 304 construction.  Less than 10 Ohms of resistivity.  This unit is cleanroom compatible and can be used in the pharmaceutical industry.  Designed for the recovery of flammable liquids.  Equipped with a Middle Ring with Activated Carbon for the adsorption of toxic fumes and vapors.  Recovered materials are easily disposed of through the drain valve.  The Interceptor Drum Unit must be attached to an explosion proof vacuum cleaner system.

Folletos y Certificados

Name	Description	Download
INT-55 TC EX (MRAC) Brochure (Metric)	Technical data for INT-55 TC EX (MRAC) in metric units (Millimeters, Kilograms...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
INT-55 TC EX (MRAC) Brochure (Imperial)	Technical data for INT-55 TC EX (MRAC) in imperial units (Inches, Pounds...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)

Información rápida

·Legalmente certificado por un laboratorio de pruebas. .A prueba de ignición de polvo explosivo ·Menos de 10 Ohm de resistencia ·*Compatible para salas blancas y en la Industria Farmaceutica. ·Diseñado para absorción de vapores tóxicos,humo y olores ·Para recuperacion Humeda y Seca ·Todo en acero inoxidable SAE 304 El tanque contiene 55 libras (25 kilos) de bolas activadas de carbón ·Basado sobre un carro de 4 ruedas Incluye una resistente Manguera de conexioncon disipacion estatica.

Detalles

Todo en acero inoxidable SAE 304 Menos de 10 Ohm de resistencia. Esta unidad es compatible y puede ser usada en la industria farmacéutica. Diseñado para la recuperación de vapores y humo secundarios. Esta unidad tiene una capacidad de 55 libras. (25 kilos) de bolas activadas de carbón para la absorción de vapores contaminados, solventes y otras toxinas. Con su diseño innovador 55 libras disponibles (25 kilogramos) de carbón activado fácilmente son eliminadas y substituidas. El Sistema de Tanque de carbón activo debe ser conectado a un sistema de aspiradora a prueba de explosiónes.

Folletos y Certificados

Name	Description	Download
AC-25 (4W) EX Brochure (Metric)	Technical data for AC-25 (4W) EX in metric units (Millimeters, Kilograms...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
AC-25 (4W) EX Brochure (Imperial)	Technical data for AC-25 (4W) EX in imperial units (Inches, Pounds...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)

Información rápida

• Legally certified explosion proof / dust ignition proof
• Stainless steel
• Designed for Open Top Drum Filling.  Can also be used for nuclear applications
• For liquid recovery
• Can be mounted on a standard 55 gallon drum
• Must be attached to an explosion proof / dust ignition proof power source

Detalles

All stainless steel.  This unit has been designed for open top drum filling.  This unit can also be used for nuclear applications.  This unit has been designed for liquid recovery.  Can be mounted on any standard 55 gallon drum.  This unit must be attached to an explosion proof / dust ignition proof power source.

Folletos y Certificados

Name	Description	Download
TRANSFER LID ASSEMBLY Brochure (Metric)	Technical data for TRANSFER LID ASSEMBLY in metric units (Millimeters, Kilograms...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
TRANSFER LID ASSEMBLY Brochure (Imperial)	Technical data for TRANSFER LID ASSEMBLY in imperial units (Inches, Pounds...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)

Información rápida

• Legally certified explosion proof / dust ignition proof
• Stainless steel
• Designed for bulk and granular recovery
• For dry recovery only
• Can be mounted on a standard 55 gallon drum
• Must be attached to an explosion proof / dust ignition proof power source

Detalles

All stainless steel.  This unit has been designed for bulk and granular recovery.  unit has been designed for dry recovery only.  Can be mounted on any standard 55 gallon drum.  This unit must be attached to an explosion proof / dust ignition proof power source.

Folletos y Certificados

Name	Description	Download
PRIMARY CYCLONIC TRANSFER DRUM ADAPATOR Brochure (Metric)	Technical data for PRIMARY CYCLONIC TRANSFER DRUM ADAPATOR in metric units (Millimeters, Kilograms...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)
PRIMARY CYCLONIC TRANSFER DRUM ADAPATOR Brochure (Imperial)	Technical data for PRIMARY CYCLONIC TRANSFER DRUM ADAPATOR in imperial units (Inches, Pounds...)	Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm)